I'm a bit new to wire feeds when it comes to problems with them. I bought a used Handler that had wire jamming just past the feed rollers. I...
Last year youall may remember I posted a thread about breaking the rear-most stud when I went to replacing my exhaust system. Drilled it out,...
I couldn't find a real shovel short enough to fit between the rear fenders, or any other solution to having one fitting anywhere so I just ground...
Anyone happen to have a cheap source? Best I can find online so far is $40+shipping.
Is there any goop that is needed to help keep the vinyl in good condition? I'm sure if the Besttop brand stuff actually helps there's something...
This is just an exercise in being the cheapest SOB on the mountain: I bought a spare F134 and want to check the compression. The old starter will...
Has anyone used one of the cheap generic ATV radio remote controls, as seen on eBay, to control a Warn 8274 or such winch? Seems easy, in my...
Warn/Saturn type OD. While doing fitup, I find the pilot bearing sleeve/collar on the bowl gear ***'y will not slip over the bearing that's on the...
Does anyone have a Napa, or other chainstore, or Raybestos, etc part # for the shoes? Or, are they mostly just avail from the online Jeep parts...
Does anyone happen to have a digital version that could the posted? (I'm trying to order parts from Herm and he sent me a printed one via...
Is this a stock oil filter for a ~'64 or an aftermarket add-on? (attached pic)
I'm finding some reasonably priced complete axles with upgraded brakes ... 1. A D27 w/ 11" drums that appears to have been setup for a Saginaw...
I think I've read all there is to read about Pertronix, Crane, Mallory electronic ignitions, and MSD and other CDS's. First the quick...
I made up a prototype/temp mount for my siren, which worked well till I dropped it. I sprayed a bit of silicone into the business area and it...
... with the torch? So, my story: I am in the process of renewing/upgrading the exhaust system. I was able to remove ALL manifold AND exhaust...
Hi all, the attached pic is looking thru the bell inspection cover with a mirror, while I'm leaning thru the passenger side door. I know it's...
Just received a NOS top for the old CJ's for close to half [new] price off eBay :) Anybody with an old 'A1 or CJ have any specific, pointed...
I'm need to do something to address a seeping tank. No real, noticable holes, but heavily rusted on the front side where dirt packed around it....
:shock: Ohh kaa, changing left rear axle bearings and seals due to it leaking like a seive. Got everything out, apart, cleaned, painted ......
'Morning from central Kaulifornia. Yesterday I received mailorder bearings, seals and a hub to do the left axle. I was surprised to find that...
Separate names with a comma.