1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Ramsey PT-1 PTO parts diagram

Discussion in 'Early CJ5 and CJ6 Tech' started by Homebrew2, Aug 14, 2008.

  1. Aug 14, 2008
    Homebrew2

    Homebrew2 Member

    Dunlap, CA
    Joined:
    Aug 17, 2007
    Messages:
    511
    Does anyone happen to have a digital version that could the posted?

    (I'm trying to order parts from Herm and he sent me a printed one via snailmail and I'm afraid it may have been lost, he wants to verify the exact part #'s before he sends them)
     
    Homebrew2, Aug 14, 2008
    #1
  2. Aug 21, 2008
    Homebrew2

    Homebrew2 Member

    Dunlap, CA
    Joined:
    Aug 17, 2007
    Messages:
    511
    I guess I've stumped the panel on this one (?)
     
    Homebrew2, Aug 21, 2008
    #2
  3. Aug 21, 2008
    Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    8,134
    Stumped?

    In your dreams-:twisted:

    [​IMG]

    H.
     
    Howard Eisenhauer, Aug 21, 2008
    #3
  4. Aug 21, 2008
    Homebrew2

    Homebrew2 Member

    Dunlap, CA
    Joined:
    Aug 17, 2007
    Messages:
    511
    Howard, thank you very much!!! I read (and printed to pdf) your winch rebuild, your link to the Willystech diagram does not seem to exist anymore ... I should have PM'd you but don't like to be intrusive. Cheers!
     
    Homebrew2, Aug 21, 2008
    #4
  5. Aug 21, 2008
    Homebrew2

    Homebrew2 Member

    Dunlap, CA
    Joined:
    Aug 17, 2007
    Messages:
    511
    Homebrew2, Aug 21, 2008
    #5
  6. Aug 22, 2008
    Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    8,134
    I'm ashamed to say it but I don't remember exactly where that diagram came from now:oops: it may have been WT but if it was I can't find it there anymore. Did you try clicking on the thumbnail on my page? It should take you to the "full size" picture of the parts diagram, thats all I did to get the link to put in post above for the pic.

    H.

    p.s.- Happy 1000th Post to Me!
     
    Howard Eisenhauer, Aug 22, 2008
    #6
  7. Aug 25, 2008
    Homebrew2

    Homebrew2 Member

    Dunlap, CA
    Joined:
    Aug 17, 2007
    Messages:
    511
    Somehow, I didn't/don't see the link on your page :oops:
     
    Homebrew2, Aug 25, 2008
    #7
New Posts