I've looked thru a couple old threads and have seen a few ideas, but what would b the best recommendation for installing a tilt steering column in...
My 69 CJ5 "Pandoras Box" too good to be true price has a bit of a wiring situation. The PO took all wire leads under the dash and hooked them to...
I've changed springs at all 4 corners and all new shackles. Won't get into too much detail, but I am pretty sure my frame is a bit twisted....
Ok, my 69 cj5 never sat "right" since I got her. I am well aware of jeep lean, but trust me, this is something else. After much research, and...
Gonna either replace or remove and hammer my bent push rods straight. Does anyone know the correct torque for the apparatus that holds them down?...
Ok, some of you shave been following my "simple" project so I won't repeat myself. In removing valve covers and intake tonight, just so I can...
I know some of you have followed my story of my recently purchased 69 cj5. Just want a reliable fun jeep for around town and trails. Had to...
So, thought I had rear main seal out, but apparently I don't. Cap is off, I can take an 1/8" brass punch (about like coat hanger but thicker) and...
I'm new to the cj5 world and learning quickly with the help of people here. My question is, is this an original 69 cj5 air cleaner? If so, what...
Anyone's opinion on what lift I have? For reference it has 15x8" rims with 31" BFG mudders. Thanks! Really would like to find out......
The PO lifted my CJ5. I like the set up but it's old and saggy. I replaced all 4 shackles, new oem in back and new HD shackles in front that are...
Trying to replace rear main seal. Dropped pan, removed cap, loosened all other caps. It still has the original rope style seal, so the upper...
Ok, picked up a rear main seal and an oil pan gasket, pulled the plug tonight. Gonna pull pan tomorrow and replace seal. I'm planning on also...
Just replaced all 4 shackles on my 69 cj5. I realize the leaf spring/shackles need to move, but is there a torque setting for shackle bolts?...
My first post! Digging into my 69 CJ5. Needs a rear main seal for sure. Question is, if my motor mounts are shot I would just as soon go ahead...
Separate names with a comma.