1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Bent push rods

Discussion in 'Early CJ5 and CJ6 Tech' started by Buddha44, Aug 29, 2014.

  1. Aug 29, 2014
    Buddha44

    Buddha44 Member

    San Clemente, CA
    Joined:
    May 18, 2014
    Messages:
    59
    Gonna either replace or remove and hammer my bent push rods straight. Does anyone know the correct torque for the apparatus that holds them down?
    Thanks much.

    69 dauntless v6.

    P.s.- don't worry about how they got bent, long story, didn't want to bore you guys.
     
    Buddha44, Aug 29, 2014
    #1
  2. Aug 29, 2014
    Walt Couch

    Walt Couch sidehill Cordele, Ga. 2024 Sponsor 2023 Sponsor 2022 Sponsor

    cordele, Ga.
    Joined:
    Mar 29, 2007
    Messages:
    5,924
    25-35 pounds/feet.
     
    Walt Couch, Aug 29, 2014
    #2
  3. Aug 29, 2014
    colojeepguy

    colojeepguy Colorado Springs

    At the foot of...
    Joined:
    Apr 4, 2010
    Messages:
    7,187

    :shock: Replace them, unless you want to do the job again.
     
    colojeepguy, Aug 29, 2014
    #3
  4. Aug 29, 2014
    Walt Couch

    Walt Couch sidehill Cordele, Ga. 2024 Sponsor 2023 Sponsor 2022 Sponsor

    cordele, Ga.
    Joined:
    Mar 29, 2007
    Messages:
    5,924
    Not really. These push-rods are solid and if you go easy on the hammer and flat steel surface you can true them back. Straight edge straight edge straight edge is key.
     
    Walt Couch, Aug 29, 2014
    #4
  5. Aug 29, 2014
    PeteL

    PeteL If it wasn't for physics, and law enforcement... 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Hills of NH
    Joined:
    Aug 3, 2003
    Messages:
    9,836
    They used to say roll them on a piece of Plate glass to check the straightness.
     
    PeteL, Aug 29, 2014
    #5
  6. Aug 29, 2014
    Keys5a

    Keys5a Sponsor

    Florida Keys
    Joined:
    Jan 23, 2014
    Messages:
    4,192
    Before you straighten or replace the pushrods, find out why they bent in the first place!
     
    Keys5a, Aug 29, 2014
    #6
New Posts