I've been saving up for quite a few years to have enough to get a new front end for the '74 CJ-6 I've got. The Jeep is currently apart being...
So, I've got Edelbrock shorties on my AMC 360 in my '74 CJ-6, and need the collectors/flanges for these headers. Does anyone have any suggestions,...
http://www.rocky-road.com/index2.html Just noticed these guys have rock rails and hard half doors for the early CJ's....including rock rails...
I was looking at another CJ-6 build thread on another site, and the shots of the frame showed a cross member I don't have on my 1974 Jeep CJ-6. My...
First let me start out by saying sorry for so many questions I've been reading up on this for weeks, but am still curious about a few things....
So, I've searched and read about upgrading heaters, but most threads are either related to the early style heaters, pre '72, or '78 and later...
Unfortunately, I brain farted while transporting my tub to the body shop, and lost one of the hood hinges on my '74. Is there an aftermarket...
I've found a source for the dash VIN sticker, but how about the stickers under the hood? The sticker that's on top of the grille right in front...
In preperation for the body work, I started pulling the Meyers top off of my '74 CJ-6 and am not sure what to do with it. I had always planned on...
I am interested in beefing up the axles on my CJ-6, and am all for overbuilding for my needs. so I've been researching the options....everything...
Let me first start off by saying that I am NO MECHANIC. I know how to put in the key and turn it, that's about it. I don't know how to adjust...
Just scored the exhaust manifold that I was missing for my CJ-6 w/304. Now I am ready to get rid of the fenderwell headers, and go back in frame...
1974 CJ6 Project - "Slowly but...well, slowly" This project isn't new, just haven't gotten around to starting a thread about it. Have posted...
Ok, I'm confused. Last weekend I visited with "Patrick" from this board, and his father and brother.....all early 5 owners, and all their Jeep's...
When installing a shackle reversal on a '74 CJ, according to the instructions, the wheelbase should have been extended by ~1". Well, that...
Still a work in progress, but here it is so far.... Hopefully I can dial in the mechanicals this year, and hopefully next year paint and body!
For my '46 I wanting to swap in V6, and of course my choices are the 4.3 Chevy, and the Buick V6. My question is what's the deal with the 252...
Took the CJ-6 out for a quick drive today while it's at the shop. Just had the carb rebuilt. The mechanic warned me of the fuel starvation...
Just like every other part or accessory out there, theses braces are or only available for '76 and up. Question: Do I need one for my '74...
Can't seem to find rocker protection for a CJ-6. I remember Christian Hazel's Project Hatari had some protection on it, but I can't find that...
Separate names with a comma.