Im thinking of selling my hardtop. It fits 76-86 cj5 it is in very good shape built about 6yrs ago. I paid close to $2000 for it. What would I ask...
I have got the disk conversion and dual MC conversion on my 68 w/ dana 27 essentially complete. However I have bled the brakes, tightened...
Hi, Finally getting into this conversion after gathering parts for a year. Anyway, several questions: 1) I have it down to the bare...
Hi, I didnt see what options were available in the tech writeup for a proportioning valve when doing a disc convert on the front D 27 axle....
Hi, My setup is 68 with 4 drums (10 inch) and the single piston MC. I am slowly gathering parts for up grade to dual piston MC and disk...
Where can I find a trailer hitch for my 1968 Cj5? My original rear bumper setup was rotted away and a tube bumper put in place. I'm looking for...
Where is the cheapest place to get decent front 10 inch drum shoes? Part numbers, price?Anyone have some fairly new ones they dont want? I'm...
Could someone measure for me how far a dual MC sticks out at the front from the top frame edge and at the back? I have the single MC and want to...
68 CJ5-I am slowly gathering parts to convert to disk front brakes. I see that most also convert to dual master cylinder, I currently have the...
I am still weighing front brake conversion to disks. I need opinions from those who have done this on: 1) Easier stopping (IE less pressure...
I have a " 68" Cj5 w/ a saginaw steering conversion. My front diff housing says it is a 27A. All of the drawings show the older style steering...
68 w/ saginaw conv. There is an adjusting sleeve on the rod going from the pitman arm to the right knuckle. There are also adjust threads on the...
Does anyone have the specifications for caster, camber and toe in/out for a 68 Cj5 w/ saginaw steering conv? Is it the same specs as a later...
1968 Cj5 w/ saginaw conversion. The front arm that goes from the pitman arm to the right side steering knuckle is slightly bent due to hitting the...
I put a drivers side exhaust man on from a 231. I used a 225 gasket. I discovered they dont cover the bottom of the ports. My question is:...
All lights work fine except: Right front turn signal works fine except when I put the brakes on -then the rt front turn stays solid light and...
Which side of the thermo faces the radiator and which side faces the engine? 225 V6. One side has the "tripod" surrounding the valve, the other...
I searched this. Lynn had posted a NAPA part # of 2-5478 for the Roch 2G rebuild kit. I just looked it up with no results. Anyone have a curent...
Ive seen Steve Lane's write up on the front disk conversion for the D27 w/ drums. Does anyone have a picture of the caliper mounting brackets that...
Can anyone tell me or show a pic of what they used for auto transmission downshift? Is it a cable, linkage, or vacuum modulator? I have a CJ5 with...
Separate names with a comma.