Hey guys, just wondered if there is anything I can do about what seems to be flooding when I am going up a steep incline? The Jeep seems to start...
Alright, I got a vacuum gauge hooked up this weekend, and at idle ~700 rpm it is pulling 15-16 in-hg. That seems a little low (20 in-hg is...
...how much better the Jeep runs now that: -it is running on all 6 cylinders rather than 4 (#2 and #6 sparkplug wires were switched...) -the...
Just wondering if a regular MSD 6A box would work with the stock Delco distributor on my 225, or if there is a separate part number for the...
So I was taking the exhaust manifold off to put headers on...and...well...i got 11 of 12 bolts off no problem... The last has its head stripped...
This is the first pushrod OHV vehicle I have owned...up to this point i have always had OHC engines. Oil gets pumped up into the valve covers of...
I'm 99% sure that it is in correctly...but I'm paranoid: what is the correct orientation for the thermostat?? I think that I may have air...
Well, I've got the mustang radiator (1965 289) bolted into the Jeep using some brackets I made (probably post pictures later..) It looks like it...
Sorry, probably a stupid question, but the service manual doesn't show a picture of where the drain plugs are for the coolant in the block. Where...
They are intriguing...nice and cheap and supposedly very easy to bend and install... What do you guys think??...
150 150 150 170 160 170 that pretty good?? :)
Hey guys, I have seen that some people have used Fiero radiators on the CJ5 with the dauntless :v6:, and that seems like the direction I am going...
Anyone used this kit? (P/n: ZX760209WF) It come with everything I would need to redo my brake lines? If not, anything else I need (T-blocks,...
radiator price Is $225 +shipping a good price for a used (but good condition) radiator for a '69 V6 CJ5? Any other good (cheaper, but still work...
Hey, I'm new, and I have done some searching and found some things to check (need to check the oil in the transmission..) so please bear with me....
Separate names with a comma.