I got a Dana 300 with short tailhousing for my Jeep the other day, and I'm cleaning it and getting all the junk off the outside of it, and then I...
I have a lead on a tranny, transfer case, and overdrive unit. I talked to the guy about it today, and he said it's from a '62 willy's, and the...
Does anyone know if Warn locking hubs for what a guy says is for a 60's wagoneer dana 44 will fit/bolt onto a late 70's wagoneer dana 44 front...
I'm gonna put a buick 350 in my CJ5 and was planning on putting a t-18 behind it, but now wondering about putting a th350 behind it instead. How...
I'm looking for a wagoneer dana 44 front axle, passenger side drop, ideally flat top knuckles. The vehicle I was going to buy with front and rear...
Went out 'wheeling on Sunday, and was having issues with my overdrive unit on my dana 18...Seems to stay in direct or overdrive just fine in any...
Does the dana 44 front axle from a 1977 wagoneer (passenger side pumpkin) come with the flat-top knuckle on the passenger side? driver side?...
Looking for a buick 350 and 4 speed with granny low for my 67 cj. I found a 1970 J3000 pickup for sale with the 350 in it with a 4 speed. Anyone...
Will the bellhousing on my 225 bolt to a buick 350 and work correctly? I know my t-86 won't hold up behind a buick 350, but I would like to use...
Just wondering what it costs (roughly, exactly, a range, whatever) to get my 225 rebuilt. I could strip it down to a bare block by myself and get...
I can get an entire 77 wagoneer for 150 bucks, and have been considering wider axles. This seems like a good price for front and rear axles that...
Been wondering about swapping in a 4.3 chevy TBI for a while. Just thought I'd start a thread about it to get some of my questions answered....
My rig has a power issue, and I think it has to do with advance in my distributor. I have the 225 with an HEI conversion from a '75 buick. My...
I want to put a Motorcraft 2150 carburetor I have on my 225, since my Rochester needs a serious rebuild and something is definitely not right with...
How many people are running the Novak headers, or know much about them? The headers I have right now are the fenderwell headers that go outside...
I have the D44 rear, offset, with the 19 spline tapered shafts. I also run 1.25" wheel spacers in the rear, but even 2+" would be okay with me...
Has anyone tried to clock the dana 18 t-case to rotate the passenger side of the case up closer to the floor to accomplish a flatter...
I live at 3500 ft. above sea level, and 'wheel around 3000 ft - 5500 ft above sea level. I just acquired a Motorcraft 2100 carburetor and I'm...
How is your exhaust set up on your 225 v-6, and what are your thoughts on your setup? I have headers on mine that route outside the framerails...
So, I've been playing around with my distributor a bit today. Basically, the rig is pretty sluggish even though it's advanced 12*, and looking at...
Separate names with a comma.