Simple counter clockwise.
I am running a power lock in my model 30 and so farthey have worked great. In the rear 44 I put a Eaton electrical locker and so far it has...
1 year to late. Great idea.
Seem to work better if you only lock in one hub.
about 12 foot of pipe with a 1 3/4 inside diameter? 66 cubic inches Smaller and lighter than a york.
Well now you have us curious. What are the plans for this?
I just installed a onboard engine driven air pump. Small in size 5.5 inches in diameter by 8.5 long. Puts out 8 cfm at 100 psi and will run a...
Added spings, axle, spindels, tonge, fenders and lights http://www.kodakgallery.com/I.jsp?c=as5xsu7x.9f2u5il9&x=0&h=1&y=-7m2s2r
Yes; It sounds like you have the start side wired but not the run side of the switch.
Bummper hand made. Winch plate I had bent for me the cut the sides bent them in and welded....
Does it try to start then die?
You will need shims to set up the new powerlock so you might as well buy a complete set up kit. If you are going to set up the ring and pinion...
transfer case mount installed wrong.
Do you have clips on the end of the axle that hold them out? Other wise the axle will slip back in. But it does sound like a hub problem. Just...
you may as well put a winch up front also
I had a freind that use to sand drag with a muncie m21, d18 and a overdrive. Engine was a 327 with about 350 HP. He never did break his but he...
Re: steering wounder above 45mph Check tire pressure. Tire shop put my 33 X 12.50 X 15 on 8 inch rims at 40 PSI. I had a bad wonder problem....
Sm 465 shifter can also be used
Doesn't it go to the idiot light ( warning light ) then to the alternator?
Just put my jeep together. Full floater in rear. Going up to the rubicon on the 18th, 19th and 20th. When will you be there.
Separate names with a comma.