Hey guys... I just installed new heavy duty tie rods from rugged ridge in my 74 cj5..... I then took it to an alignment shop and they zeroed out...
my kids got me a new steering wheel for my 74 cj5. I removed the 1 1/4 nut and brass bell for the horn assembly but cant get the steering wheel to...
I pulled my fuel tank to install a new fuel line...thought while I had the tank down I would adjust the fuel sender that never really gave me an...
Need some advise on where the best location would be to mount the coolent sensor. The instructions for my fast fuel injection says in the intake...
Purchased a fast efi conversion kit for my stock 74 cj5 ..I got tired of being that guy who kept stalling out in the steep rock climbs... The kit...
Just installed a digital msd ignition box and a new coil on my stock motor...I want to share with you all how much this small change dramatically...
hey guys, I need some reassurance... my 85 cj6 jeep has an engine with a manual transmission....i found the same engine that i would like to swap...
Hey All, I just finished a 2.5" lift on my 74 cj5... I now have a vibration in the drivetrain when in the 40 to 50 mph range....wondered if...
Two years ago I picked up my first 74 cj5 for $2500.00. I wanted to share with you my work in progress. The jeep had a bad knock in the engine...
Hey Guys, I am looking to improve my ride and decided a set of new leaf springs and shocks for my 74 cj5 are the ticket. I am not looking for any...
yesterday after work i glanced down at my voltage meter and noticed it was spiked at about 18 volts!!! i turned on my headlights for a little draw...
Last summer I rebuilt my 258 amc motor and clutch in my 74' cj5.... for the last month I can feel the throwout bearing through the clutch pedal....
for any of you who have installed arb lockers yourself..... Is this a project your average guy can do? or should it be left to a professional?...
as an upgrade for a more heavy duty set up....Does anyone know which dana axle's will fit the 74 cj5..... do they have to be manufactured from a...
I just installed this bumper on my 74 cj5. [IMG] it is designed to fit the 1987-1995 jeep wrangler. but with less then 30 min of time and a...
Purchased a wiper switch for my 74 cj5. The original switch is square and this replacement is round. figured I would just open my shop manual to...
So I am in the process of customizing my dash on my 74 cj5. I have purchased a few new gauges and chose to keep the original style speedometer....
the Last time I removed my dana 20 transfer case from my jeep it got hung up and wouldn't come free from the transmission. with a lot of prying...
I Wondered if any of you guys have used the omix ada speedometer replacement for there jeeps? The fuel guage and temp guage have one terminal...
My dash is old and tired, none of the guages work, the radio cutout is not where i want it and i think its time for a fresh start. I would love...
Separate names with a comma.