1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Recent Content by JeepHammer

  1. JeepHammer
    Post

    Wheel bearing and water fording question

    Good wheel seals, and don't forget about the stub shaft seals! If the water gets into the axle tubes, you may want to have some Axle housing...
    Post by: JeepHammer, Oct 4, 2007 in forum: Intermediate CJ-5/6/7/8
  2. JeepHammer
    Post

    Adding power steering to a 75...how difficult?

    I just did this on a couple of jeeps around here, and here are a couple of tips that might be interesting... FSJ, especially J-Trucks, used...
    Post by: JeepHammer, Sep 30, 2007 in forum: Intermediate CJ-5/6/7/8
  3. JeepHammer
    Post

    To battery or solonoid?

    Not quite sure what you are asking, so see if this helps, Not exactly the right way to do things, but will get you up and running. This is...
    Post by: JeepHammer, Sep 29, 2007 in forum: Intermediate CJ-5/6/7/8
  4. JeepHammer
    Post

    73 Jeep Transfer Case

    Mine kind of wants to stop there, but I don't let it. If you ever see the engagement dogs on the T-case gears, you won't let yours either! Good...
    Post by: JeepHammer, Sep 22, 2007 in forum: Intermediate CJ-5/6/7/8
  5. JeepHammer
    Post

    73 Jeep Transfer Case

    '73 had a Dana 20 in it. I'm not seeing any other options, but who knows with jeep... ---------------- If you have a Dana 20 of '73 vintage,...
    Post by: JeepHammer, Sep 21, 2007 in forum: Intermediate CJ-5/6/7/8
  6. JeepHammer
    Post

    new alternator for my 74 cj5

    Actually, according to the 1974 Factory Service Manual, In '74 the I-6 engine used the Delco 10 SI series internally regulated alternator. The...
    Post by: JeepHammer, Sep 20, 2007 in forum: Intermediate CJ-5/6/7/8
  7. JeepHammer
    Post

    Engine Wiring - Please Help

    Welding cable is a much better idea than 'Battery Wire' from the discount stores. Welding cable is fine strand wire, that means it will carry...
    Post by: JeepHammer, Sep 18, 2007 in forum: Intermediate CJ-5/6/7/8
  8. JeepHammer
    Post

    Engine Wiring - Please Help

    This would be the absolute correct way to wire your off road vehicle for starting & charging. Battery & Starter cables at least 4 Ga. and...
    Post by: JeepHammer, Sep 18, 2007 in forum: Intermediate CJ-5/6/7/8
  9. JeepHammer
    Post

    Engine Wiring - Please Help

    Ignition System, You WILL NEED a resistor for the ignition, Wire or Pot type, at least 1.35 Ohms, or your ignition module won't live. [img]...
    Post by: JeepHammer, Sep 18, 2007 in forum: Intermediate CJ-5/6/7/8
  10. JeepHammer
    Post

    Engine Wiring - Please Help

    Starting & Charging, Quick Wire Diagram. This is NOT the correct way to wire a Delco SI Alternator, but it will work for testing and charging the...
    Post by: JeepHammer, Sep 18, 2007 in forum: Intermediate CJ-5/6/7/8
  11. JeepHammer
    Post

    Engine Wiring - Please Help

    Technically, a wire 'Spooled' (a technical term) forms a 'Winding' (another technical term). A winding around a ferrous metal core is an...
    Post by: JeepHammer, Sep 17, 2007 in forum: Intermediate CJ-5/6/7/8
  12. JeepHammer
    Post

    Engine Wiring - Please Help

    Let me see if I can help you out... Assuming you want to use your factory DuraSpark module and factory Motorcraft distributor, and factory...
    Post by: JeepHammer, Sep 17, 2007 in forum: Intermediate CJ-5/6/7/8
  13. JeepHammer
    Post

    dana 30 ball joint of choice

    I used Spicer for 30 years and haven't been disappointed yet.
    Post by: JeepHammer, Sep 11, 2007 in forum: Intermediate CJ-5/6/7/8
  14. JeepHammer
    Post

    more wiring help

    If you have a '1 wire' then all you need is a heavy wire on the back. If you have a regular Delco, then you have the correct diagram.
    Post by: JeepHammer, Sep 10, 2007 in forum: Intermediate CJ-5/6/7/8
  15. JeepHammer
    Post

    more wiring help

    I would say you are good to go with the diagram you picked out. If you need help, let me know and I'll answer any questions you may have.
    Post by: JeepHammer, Aug 31, 2007 in forum: Intermediate CJ-5/6/7/8
New Posts