You could retap the hole to mount a permanent stud for the exhaust, rather than using a bolt.
I've had an old Jaguar soda blasted. It works extremely well for removing paint without heating or harming the panels underneath. It will not...
I'm looking for a source for a longer speedometer cable. I'm building a new dash for my 67 CJ5, and need about 1 more foot of speedo cable...
The center bolt doesn't have a hex head on it on the Pro Comps I had, so I grabbed the head with vice grips. No problem getting it out otherwise....
I got the rear done today. I removed two leafs from each spring pack. What an amazing difference. I lost about an inch of lift, but the ride is...
I have shackles that are 3 5/8" center to center on the bolt holes. Any idea what stock shackle length is? The bottom of the shackle is 1/2"...
So far I've removed leafs from the front end. Seemed to soften it up quite a bit. The back end isn't done yet (We have a nice thunderstorm...
I've got a 67 with the :v6:. It has a Pro Comp 2.5" lift with 6-leaf springs front and rear, and Explorer shocks. I've got 31" tires on it....
I'm hitting the bracket. There is a bumpstop mounted to the frame directly above the axle already. Looks like I'll break out the Sawzall.
I'm converting my 67 to discs all around. On the front passenger side the caliper will hit the snubber bracket during a right turn, severely...
I took the pill out and it slid right off. Thanks for the help. It is most appreciated.
Re: T18 shift dog removal The T18 transfer case. I'm probably using bad terminology. The shift housing has two shafts that go into the main...
Separate names with a comma.