Thanks alot for the pics. They really helped!
Does anyone know where the parking brake handle mounts on a 65 cj. I recently purchased a used one (umbrella style) to hook up the parking brake...
I have a 65 CJ5 and there is about a 2" height difference between my brake pedal and clutch pedal. When you go to apply the brakes if your not...
I have a 65 CJ5 with a 231 V6 and a set of Pacesetter headers. The mufflers exit in front of the rear tires. Promblem is they are way to loud! I...
thanks for the help!
I was checking the timing on my 231 oddfire v6 and the timing was off a little. Can I rotate the dist. (GM HEI) and set the timing? I did a search...
The book says to bend one side in on the inner nut and one side out on the other nut. Seems that it would be easier to bend it in than out. Does...
When installing the front wheel bearings on drum brakes the book I have says to bend over part of the washer on to one of the flats on the spindle...
I'm just going to go to the local part store and get some different studs because what Quadratec sent was wrong.Here is a pic of the stud. Thanks...
The studs that Quadratec sent me had no flare on them. The threads go down to the head on the stud. Also, the diameter of the studs is smaller...
Separate names with a comma.