I Installed a fan shroud plus a coolant reservoir and have noticed a great improvement in cooling.
One thing that I did that worked well is installing studs in the head then installing the gasket as described above. That way the gasket stays in...
Thanks. I'll give it a try. Wanted to see what shape everything is in and if can be salvaged.
I have a bestop and love it.
I want to remove my heater assembly to possibly refurbish or look at installing a Mojave heater but don't know where to start. What all is...
Do you kow where I can get a replacement new canister as mentioned above. I have a 75 CJ5.
Where can you get a new canister?
I had one made for my 75 CJ5 by Warrior Products in Tualitin OR http://www.warriorproducts.com/contact.html . I ordered a blank one and had...
I bought one from him and it worked great!
I am wanting to upgrade my heater in my 1975 CJ5. Can anyone recommend one that is the least pain in the rear?
Do you need upper or lower or both?
If you need some. I know where you can get the replacement 72-75 upper and lower hinges. I too bought a windshield from the same place. I made it...
I was having problems and found a rear u-bolt had come loose. Yousa!
I would use a product called Gaskacinch. It is tacky, like tar but will keep the gasket in place and won't leak
Is it getting loose when accelerating and decelerating or all the time?
No it won't. 76 and 75 windshield hinges are two completely different animals you would need a windshield from a 72-75. If you are looking for...
Have you checked your rear axle u bolts to be sure that they are tight?
75 CJ Exhaust Manifold Heat SHield I am wanting to replace the tin heat shield on the RH exhaust manifold. Does anyone know of a supplier for...
I was having controllability issues (especially when accelerating or decelerating) and found out that my rear axle "U" bolts were loose allowing...
Does anyone know where I can get an alternator bracket for a 1975 CJ5 w/ 304?
Separate names with a comma.