Wow! That looks EXACTLY like my '64. My dad repainted ours but I believe the original color was what you said, mallard blue? I always thought it...
Check the bellcrank. That's where most of the slop is in my rig.
Yes I have an FSM. I'm pretty sure I need kingpin bearings because I do have the play in the wheels that you describe. Not sure if I need wheel...
I am planning a front end rebuild but I won't be able to buy all the parts at once. I was wondering what order should be followed when rebuilding...
I just measured my toe in and it is way off! My tires are toed in more than an inch. What affect would this have on driveability? Could this be...
I am wanting to go through my front end and replace pretty much everything that is making my steering loose. I already have a new draglink on...
Only thing I can recommend is soaking the bolts in PB blaster for a couple of days, respraying them daily, and then take it slow when you try to...
You basically need to get up under there and watch everything while you have someone move the wheel back and forth and you will see where the slop...
I would take it to a professional painter that does freehand pinstriping and whatnot. I know I wouldn't want to booger up a good paintjob with a...
I will also recommend Kaiser-Willys. They are local to me and have helped me out a lot with my Jeep and getting the right parts, lending me tools,...
I think most will say the Bestop Trailmax Classics are about as close to original as you can get. I am planning on getting a set myself pretty...
I found that running a bottle of Lucas oil stabilizer in with my oil helped quiet my engine down alot. I know that's probably not the best...
Haha, that thing looks awesome!! Keep us posted on the progress and when you get it running, a vid would be sweet!
Thanks aallison. Yeah I thought about that too last night, but was too tired of fooling with it to check it out. I hope it's something that...
I don't have an impact at my house, just a big half inch breaker bar and 3 ft pipe. Yeah I just read somewhere about the pipe wrench to hold the...
I've been spending alot of hours working on my Jeep the past few weeks, fixing steering issues, new brake MC, replacing gaskets, new taillights,...
Yeah I remember when you came down here a couple years ago and I was supposed to meet you at Appleby's. But when I drove up I didn't see any Jeeps...
Touche. But I do think it runs really good, considering. :)
Thanks guys. I just picked up the gasket from Kaiser Willys and plan to fix this tonight. I also picked up a new oil pan drain bolt and front and...
Well huh. You learn something new everyday. That means that all I have to do is get a new gasket and that should fix that leak. Once again,...
Separate names with a comma.