Ahh good idea. Now though, what was the stock setup for the rear axel breather. What I though was the hole for the bolt down is acutally the...
That bolts the brake line splitter down to the rear axel tube? Or possibly where to source one? Thanks!
Yea the angle with the 4" bound the d-shaft but now with the rear pinion pointing at the output yoke -2 degrees or so even the upper angle looks...
I'm in the middle of adjusting the pinion angle on my back rear and have a few questions. The current setup is a 4" lift, dana 44 rear and dana...
Well this build has been a long road now spanning 5 years since the day the jeep arrived as a hole ridden lawn ornament with a siezed motor. To...
I'm getting ready to run brake lines on the chasis of the rig and am wondering if anyone can souce the sizes of the lines for me. I have a 74 with...
thanks guys, yea it just looks really weird. Does anyone know if aftermarket goodridge ss lines use the standard fitting or a banjo bolt to our...
Wondering if anyone out here can produce a picture of where the brake hose connects to the wheel cylinder through the backing plate? I rebuilt my...
I dropped a 86 305 sbc into my rig and am now getting to adapting my power steering setup. I have a new stock ps box and the stock chevy ps pump....
Im running a 4" lift on mine. Now given it's not on the road yet the backspacing on the rim will play a big part in the setup. The im Im going to...
haha np man if you have any other 74 question drop me an email and I'll be as of much assistance as I can GL with the install :)
Hey just went and pulled some measurments off my xmember. 10-1/2 passenger 13-1/2 Driver So it looks like you have the right xmember :o
Well yea... I think i will go with the 15x8 3-1/2 BS. Thanks for the info guys :)
what are the gains of a 10inch rim comapred to a 8inch? My pops says I should stick with a 8" :o
Any idea what backspacing I should look for? Thats whats really stumping me :(
Well I have a 74 CJ5, 4 inch of lift, with about a one inch body lift. My plan is to run 33's maybe 35's in a 12.50 width on 15x8 rims. Now th...
Im curious as well being I'd like to get one for my 74 :)
Hey man Sweet deal I'll take those off your hands for sure. Get me a shipping amount and I'll send you a M.O/Personal check. Wish I could help you...
Anyone have a set or know of where I can find a set? Well I really only need the driver side lower portion but a set would be fine as well. Id...
Separate names with a comma.