1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

making my 5 a 6

Discussion in 'Builds and Fabricators Forum' started by cj6/442, Jul 8, 2012.

  1. cj6/442

    cj6/442 Sponsor

    Chuck ,that's not including the tire size,right?l

    crap I will need help getting the spare tire on the jeep cage.it's a killer
     
    Last edited: May 14, 2013
  2. cj6/442

    cj6/442 Sponsor

  3. Chuck

    Chuck Sponsor

     
    Last edited: May 14, 2013
  4. cj6/442

    cj6/442 Sponsor

    I love forklifts for twisting junk up.
     
  5. willys59cj5

    willys59cj5 Sponsor

    ????????
     
  6. cj6/442

    cj6/442 Sponsor

    ok no pics for awhile now ... lots of little stuff done .
    [​IMG]
    radios run'n
    [​IMG]
    twisted Sway up with a buddys forklift .got 30" of upward travel before a 3rd tire lifts off the ground .probably a bit more with real world stuff
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    installed bumpstops from MPC in the frontend to keep tires from beating fenders(thanks Mike )



    cut 3/8"off front yoke so I don't drive shaft through transfercase if I hit a bump at speed .I have shackle reversal
    [​IMG]
     
    Last edited: May 25, 2013
  7. johneyboy03

    johneyboy03 The green beast

    Preety good for a leaf spring set-up, with my coil spring on my 5's i can lift 32 inch before another one get up. You can have a little more if you do it with 5-6 psi in the tire.
     
  8. cj6/442

    cj6/442 Sponsor

    drove it around today on and off road , OBA filter was not fully tightened on to the York compressor ,it rattled loose ,fell off onto the header and melted the plastic oil site glass on the side,spilling oil on header not good lots of smoke .......found I forgot the cotterpin on the AA chain clutch , no biggie,pin didn't fall out
    drove on the hwy . man people drive so fast ,,WHY??? what is the rush
    no real shimmys or vibrations .didn't really notice the 35's,,,,, I thought I would loose more power .

    Johneyboy give me a year to break it in and I'll make 32" .
     
  9. willys59cj5

    willys59cj5 Sponsor

    Lookin great Steve! Can't wait to see it on the Rubicon with the group :)
     
  10. bigjohn

    bigjohn Active Member

    Thats great news (aside from the smoke show anyway)! So does that mean you are roading it up in July?:D
     
  11. cj6/442

    cj6/442 Sponsor

    that's my plan/goal but we shall have to see how work plays out .......right now I'm booked solid .if I have work I need to take it,,,,,since the first part of the year was very bad .
     
  12. CJ5Kyle

    CJ5Kyle Member

    how did you sink in your headlights like that?
     
  13. sterlclan

    sterlclan Member 2024 Sponsor 2022 Sponsor

    it uses an m38a1 grille...
     
  14. '72CJ5

    '72CJ5 Member

    Right on Steve, glad to see its goin!!! Looks awesome. If you slap some yota springs on, you can hit right between 38-39".... Just sayin haha. Hope you can make it, I will be there long as work dont cancel my vacation.
     
  15. HeavyIron

    HeavyIron Member 2024 Sponsor

    Looking Good!!
    I understand about the work situation, Hope you can make it though.
    If not there's BB!! Or CB! when it cools down
     
  16. jzeber

    jzeber Well-Known Member 2022 Sponsor

    X2, hope you can make it.
    How about Swamp Lake later in the summer? Closer to home for you.
     
  17. cj6/442

    cj6/442 Sponsor

    jeff that's my weak spot , WAY closer and more fun ......

    Alan you would love the Dusy .
     
  18. Posimoto

    Posimoto Hopeless JEEP Addict

    Ooh! Ooh! I want to go too.
     
  19. willys59cj5

    willys59cj5 Sponsor

    Me Too!
     
  20. '74Renegade

    '74Renegade Active Member

    Me three! always wanted to go to that area, just haven't made it yet.