1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Recent Content by Big G Little n

  1. Big G Little n
    Post

    steering box

    I had the same problem with my 74 w/304. The PO had installed the power steering. I modified my bell coupler to fit the steering shaft. Then when...
    Post by: Big G Little n, Dec 16, 2010 in forum: Intermediate CJ-5/6/7/8
  2. Big G Little n
    Post

    What did I do wrong?

    You might want to check your transfer case. I had a simular problem. What I found was my transfer case was popping out of low range. Rebuilt...
    Post by: Big G Little n, Oct 10, 2009 in forum: Intermediate CJ-5/6/7/8
  3. Big G Little n
    Post

    1974 Shop Manual in PDF

    Thanks alot for doing this!!!!! This will come in real handy since i will be starting a rebuild on my 74, right after elk camp.
    Post by: Big G Little n, Oct 3, 2009 in forum: Intermediate CJ-5/6/7/8
  4. Big G Little n
    Post

    New Blog!!!! (Tranny help)

    I don't know who made the shifter!!!!! I did have to cut and weld it previously to keep it from touching the cut out in the floor. Now after the...
    Post by: Big G Little n, Apr 20, 2009 in forum: Intermediate CJ-5/6/7/8
  5. Big G Little n
    Post

    T-case question

    Not exactly sure what you are talking about, but here is a picture of my tranny mount. If this helps? 74CJ5, 304, T15, D20 [IMG]
    Post by: Big G Little n, Apr 20, 2009 in forum: Intermediate CJ-5/6/7/8
  6. Big G Little n
    Post

    Transmission mount... What is this?

    This my transmission mount setup. I Have a 74 CJ5, 304, T15, D20. Maybe this will help? [IMG]
    Post by: Big G Little n, Apr 20, 2009 in forum: Intermediate CJ-5/6/7/8
  7. Big G Little n
    Post

    New Blog!!!! (Tranny help)

    Here are the pictures!!!!! [IMG] [IMG] [IMG]
    Post by: Big G Little n, Apr 18, 2009 in forum: Intermediate CJ-5/6/7/8
  8. Big G Little n
    Post

    New Blog!!!! (Tranny help)

    O.K. I finally broke down and decided to rebuild the transmission and transfer case. As far as the transmission jumping out of first, I have no...
    Post by: Big G Little n, Apr 13, 2009 in forum: Intermediate CJ-5/6/7/8
  9. Big G Little n
    Post

    Welding 101 with Rich

    kf...Being a retired aircaft welder I have seen people that can weld aluminum but could not weld stainless and the other way around. Best advise...
    Post by: Big G Little n, Mar 14, 2009 in forum: Builds and Fabricators Forum
  10. Big G Little n
    Post

    72-75 Seat Bracket Measurements

    I had to build a set for my 74. As soon as I can will post pictures of what I did. These are not real fancy, just functional. Should be able to...
    Post by: Big G Little n, Mar 12, 2009 in forum: Intermediate CJ-5/6/7/8
  11. Big G Little n
    Post

    Rear Bumper Ideas ?

    I made mine out of 1 1/4" pipe since I had some laying around. Attached to the jeep with 2" square tubing. I also made it swing type for easy...
    Post by: Big G Little n, Mar 7, 2009 in forum: Builds and Fabricators Forum
  12. Big G Little n
    Post

    Transmission and Transfer case identification

    O.K. I now have the casting numbers from the transmission. 13-07-065-901 W-G-01V Just got on Novac web site and indentified it as a T-15. Will...
    Post by: Big G Little n, Mar 7, 2009 in forum: Intermediate CJ-5/6/7/8
  13. Big G Little n
    Post

    How much lift?????

    CJ-X, Thanks for the info on Rancho Shocks.
    Post by: Big G Little n, Mar 7, 2009 in forum: Intermediate CJ-5/6/7/8
  14. Big G Little n
    Post

    Help picking new tire size

    I also have a 74CJ5. I am not sure on the lift. But my 33X12.50X15's look pretty good to me.
    Post by: Big G Little n, Mar 5, 2009 in forum: Intermediate CJ-5/6/7/8
New Posts