Just started my rebuilt F-head....I should have drilled a hole in the thermostat before I started because it didn't take long for the temperature...
Thanks...sounds pretty simple.
I'm almost ready to start my rebuilt F-head (61 CJ5) and have been reading all the threads I could find about this but still have a few more...
I took my dana 18 apart ('61 cj5) to clean inspect and replace oil seals/intermediate shaft/bearings etc. The output shaft bearings were in good...
After searching the threads, I found only a similar question about a dana 27 and wanted to know if the same is true for the 25 with spicer joints....
bead blasted the wheels on my '61 cj5 and am getting ready to paint them.....only question: do you paint the inside of the wheel as well? Same...
You're right...it is in the tech library - amidst the madness I must have skipped over the four lines that cover it. Thanks for the reply.
I came across an old city jeep - Appears to be a mid 70's cj5 - behind a house in an alley in Cincy. Overall the Jeep is in poor shape, however,...
You guys are scareing me with the split rim stuff - that only applies to the military bolt together rims right? or are my 15" stock rims "split?"...
Separate names with a comma.