so I bought a new pertronix unit, and for some reason I think its the wrong unit. My unit says to bolt on the lower ignitor plate to the...
Well so I took it out yesterday for the second time. The brakes work great now, the break lock and the brake light pressure switch work great...
I bought the engine already assembled this way so Im not sure why they built it with 225 heads. Maybe they had some sitting around with the intake.
Update the Jeepster is ready for the 1st ever test drive today. bled all the discs last night and adjusted the clutch. Now I need to drive...
okay so last night I tried to take it out for the inagural ride. I couldnt get the clutch to dissengage. I ajusted my linkage all the way in and...
I would stick with a buick v6. I found a 231/225 built engine for fairly cheap. Look for a early 231 or another 225. They rock!!!! They have...
sorry I just resized them.
Well here is a picture of my project. 67 jeepster with Cj5 front. lifted 8 inches. 73 3/4 ton chevy full width front 44 with high steer, 1 ton...
my new engine!! need help with internal information. recently purchased a 231 with 225 top end. I believe it is an odd fire, but I need to...
I run a 225 v6 and a adapted t150 with a dana18 transfer case. I need a throwout bearing for my t150. Anyone know what year /type of throwout...
Thanks for your responses. The new shackles are an inch longer than stock, they are welded together in the middle. I had some 3 degree shims I...
Separate names with a comma.