Hello and thanks for taking time to read this. I'm using the Novak kits to re-seal my 1970 V6 transmission and transfer case, in an effort to...
Hello and thanks for taking time to read this. Took the T14 and transfer case out of my 1970 Dauntless V6 CJ5 to try and finally find/repair the...
Hello and thanks for taking time to read this. My 1970 CJ5 with Dauntless and T14A transmission has a leaking transfer case. My research tells me...
Hello and thanks for taking time to read this. My 1970 CJ5 drivetrain has a leaky transmission, I've done the easy things, reseal the bottom...
[IMG] [IMG] [IMG] [IMG] [IMG] [IMG] [IMG] [IMG] [IMG] [IMG] [IMG] Hello Some pictures of the 1970 CJ5 V6 that was restored with a reproduction...
Hello and thanks for taking time to read this. I'd like to mount a rear view mirror on the central windshield on the Jeep, there was not one there...
Hello and thanks for taking time to read this. My CJ5 will never be a rock crawler, and as a senior citizen I would like to see if there are ways...
Hello and thanks for taking time to read this. Can someone provide measurements, or direct me to where I could find them to tell me where the...
Hello and thanks for taking time to read this. Putting the Jeep back together after body replacement and engine/transmission out to clean them up....
Thank you for taking time to read this. On a 1970 Dauntless V6, 86k miles, sat /used as a snow plow, oil was very dirty. Today started the engine...
Hello and thanks for taking time to read this. I'm putting an MB body on a 1970 CJ5 with the Dauntless. I have a new gas tank and sending unit (...
Hello and thanks for taking time to read this. Not knowing that Walcks was going out of business I bought a complete new wiring harness for my...
Hello and thanks for taking time to read this. I'm looking for a steering shaft in good usable condition to modify ( shorter) for my 1970 V6 CJ5....
Hello and thanks for taking time to read this, I am going to try to add a tilt/telescoping steering set up and want to have a second shaft to cut...
Hello and thanks for taking time to read this. Putting an MB body on a 1970 CJ5 with the Dauntless V6, 1.5" inlet and outlet on the radiator,...
Thanks for taking time to read this. On a 1970 CJ5 Ross box, to move the steering wheel closer to the dash, how practical is it to shorten the...
Hello and thanks for taking time to read this. Before putting the new wiring harness in the CJ5 I was wondering about installing a remote "kill...
Hello and thanks for taking time to read this. In searching for non directional tires much like body parts, I see prices across the spectrum, can...
Hello and thanks for taking time to read this. I'm restoring a 1970 CJ5, with 15" wheels and Lockers, I'm looking for a set of solid steel wheels...
Hello and thanks for taking time to read this. My 1970 Dauntless came without the hose that connects the air cleaner to the drivers side valve...
Separate names with a comma.