I am currently converting my 2 piece Dana 44 to a full floating axle. I finally have gathered up all of the parts and thought that I was ready to...
I really do hate Bed liner unless it is in a pickup bed but I am fixing up an old Meyer top and got to thinking. I also hate how loud metal tops...
I am currently picking together a full floating Dana 44 for my Heep. I owned a Warn full floater a few years ago in a flat fender and it had Allen...
I have a real nice pair of 10 spline Warn locking hubs that I want to sell. These have a few scuffs on them but look like new inside. I would...
Can anyone point me to a source for the bushings in a 5687 ? These bushings seem to be some kind of plastic like material. I believe I have found...
My '61 has a good running F-135 and 4.27 gears and original T 90 tranny. I am considering new tires and would like to go to something around 32'...
I have just about given up my search for a flanged Dana 44 and have heard bad things lately about Herm's so that cancels any hope of finding a...
Been toying with the idea of converting to YJ springs but I am not sure what springs to use. Have any of you did this with stock YJ springs and if...
I am in the process of covering my Heep to disk brakes. I am actually replacing the whole front axle with a 1979 Dana 30. I need the 7/8" rotors...
I picked up a narrow track Dana 30 with disk brakes to put under my '61. Date codes on this axle read 1979 , it has the 6 bolt lockouts but the...
Could someone please give me the torque setting for the nut on a 2 piece axle Dana 44. I have a repair manual but have looked for it for a couple...
I have been working on my '61 CJ5 for a little over a year now and have finally got it running, sort of. It will only run at half choke. I cleaned...
Need a little help from you experts. I tore my clutch down a few weeks ago to replace it. What I didn't do was pay attention to the disk...
[ATTACH] I am currently putting together a D18 for my CJ5. I needed a part so I went to the shed and grabbed another transfer case that I acquired...
I am getting ready to put Saginaw steering on my '61 CJ5 project. I have acquired the box, column and cast iron bracket from an intermediate CJ....
Was contemplating installing swinging pedals in my "61 Cj5 but I'm not sure how to make the clutch linkage work with the stock F-134 clutch. Not...
Separate names with a comma.