1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Rear Axle Torque

Discussion in 'Early CJ5 and CJ6 Tech' started by C-dubb, Feb 8, 2023.

  1. Feb 8, 2023
    C-dubb

    C-dubb 1961 CJ5 restomod

    Atchison, KS
    Joined:
    Oct 11, 2021
    Messages:
    83
    Could someone please give me the torque setting for the nut on a 2 piece axle Dana 44. I have a repair manual but have looked for it for a couple of hours today and cannot locate it in my disaster of a shop. I just installed 11" brakes and need to know. Thanks.
     
    C-dubb, Feb 8, 2023
    #1
  2. Feb 8, 2023
    Rich M.

    Rich M. Shoe salesman 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Maryland
    Joined:
    Mar 23, 2008
    Messages:
    2,227
    150 ft lbs.
     
    Rich M., Feb 8, 2023
    #2
    Stakebed and C-dubb like this.
  3. Feb 8, 2023
    danielbuck

    danielbuck Uncle Buck

    USA
    Joined:
    Jan 22, 2013
    Messages:
    307
    and don't back off the nut if the cotter pin doesn't line up. advance it to the next slot if one isn't lined up after it's torqued.
     
    danielbuck, Feb 8, 2023
    #3
    Stakebed and C-dubb like this.
  4. Feb 8, 2023
    skipilot

    skipilot Member

    Joined:
    Dec 16, 2007
    Messages:
    75
    I know where you put your shop manual. It’s in that spot where any fool can find it…just as soon as the immediate need has passed. I put things there all the time.

    Tim
     
    skipilot, Feb 8, 2023
    #4
    vtxtasy and C-dubb like this.
  5. Feb 9, 2023
    Oldpappy

    Oldpappy A.C. Fults - Curmudgeon at large 2022 Sponsor

    East Tennessee
    Joined:
    Feb 8, 2021
    Messages:
    1,695
    And be sure you don't put the key in ahead of the hub. Put the hub on axle, align key slots, then tap in the key. Doing this in the wrong order will split the hub.
     
    Oldpappy, Feb 9, 2023
    #5
    givemethewillys and Stakebed like this.
New Posts