I have a 1965 Buick V6 225 in my 58 jeep, over heating at higher RPMs ie speeds over 50 mph { No RPM gage& no overdrive} & Double check timing...
I have a Holley 2 barrel carb on a 1962 V6 225 in my 58 CJ. after searching many threads, getting a vacuum gage and using it seamed to be the...
:iagree: with Steve Omix-ADA. Only had problems with Omix!!! last resort after all else fails
QUOTE=w3srl;857826]Sounds like there is another issue here besides the cooling system. Have you tried different timing settings? Not enough...
Over heating-aluminum vs copper radiators, I posted a topic over in early Cj 5 gruop you may find to helpfull or not, dealing with the AL vs...
Steve Thanks-- Timeing !! see last post as to details In trying to solve my overheating problem when running 50 mph {245*} with V6 in 58 CJ...
I mounted my spare tire to the passenger side looked good out of the way, until I got into some heavy 4wheeling with trees, all went good until I...
All I did to remove the "Pill" was pull the plug <17> and the spring along with the ball <18 & 19 > shifted the transfer case to align the pill...
It reads TM 9-2320-208-20P Department of the army Technical manual organization Repair parts and special tools for Truck, Utility; 1/4-Ton,...
First class job. My hat is off to ya!!! :drool:
Nice Job!!! looks like alought of planing went into it. good craftsmenship, I'd like to buy one for my winch! email sent to ya. Rusty
It's alive!!!!!!!!!!!!!!!!!!! 1960 CJ5 :v6: 225 R) I have made a long list of what I ran into doing this conversion, to large to post { I tried...
I have searched come up with everything else, lots of bits & pieces. I'm not as computer savey as most when it comes to useing search...
Just picked up a 1965 :v6:CJ5 PO butchered the tub. I have the frame and complete drive line. frame has been butchered also no idea what he was...
{ Any ideas? What can I do to repair this tank? Weld that hole shut? Also, when I fill the tank, it leaks out of the tank from the hole, not from...
I'll get you a picture not sure how it will help with what color it was from factory. :?
There are two types of plows 1. a bottom / mold board type and 2nd. is a disc type that has a 20" to 26" disc ( not to be confused with a...
Found one ! still in good shape, was under a old hog pen, Not a barn find but next best thing still protected from weather, To the question, What...
It's is a vacuum selector switch, they were installed to be used when a second vacuum windshild wiper motor was installed instead of the passager...
I have one on my 1960, it is mounted on the rear. I love that winch it is an OX, only draw back is the break on them; most are broken off so the...
Separate names with a comma.