After a second rebuild by The Carburetor Factory on my Rochester 2G, I continue to have run on and noxious fumes. I have adjusted the set screws...
I have the original Rochester 2g on my 67 225 v6. Reguilt 2 x in the last 5 years but it does not seem to work very well. Lots of deiseling and...
Has anyone installed the new throttle body atomic efi on a Buick 225 v6 jeep ? Just hoping for a solid option for this motor to finally replace...
Just bought a sending unit replacement. 1967 225 V6 original. Everything lines up correctly, 6 screws, but this unit has a ground wire. The...
I am looking to buy and install the Pertronix upgrade. I have the factory set up--Delco Distributor with the vacuum line. 225 v6. I think I...
I am looking to replace my orginal carpet that came with my 1967 cj5. The carpet is in rough shape now. It is at the end of the line but all...
I know this has been covered but I cannot find the correct replacement part number for my master cylinder. 1967, 225 v6 stock. The current...
I have looked at the bearcreaksurvey manafold Dauntless v6 stickers and they are clearly green, white and red color scheme. I emailed them and...
Purchased the plastic defrost duct from Walcks which they tell me does not use a clamp to attach the actual flexible hose. It is supposed to just...
I need to replace the grill to heater hose on my 67 225 v6. Looks like a dryer hose. It is has lasted 46 years but it is time. Heater is...
Well after last weekends Rubicon carnage I have a bent tie rod to deal with. Jeep has the upgraded 78(cj5) Dana 30 with disk brakes. I would...
I tore the gas cap off my jeep on the Rubicon and it is toast. Does anyone sell the black oem sytle replacement locally at a store(i live near...
How easy is it to change the oil pan gasket? 67 225 v6 with 72k original miles. never been touched and runs well. Just always oily drips off...
Who sells a decent steering wheel cover for the school bus 17" wheel? I have checked Autozone and Oreilly but they do have them. Any thoughts?...
I am trying to waterproof my jeep for the upcoming winter. Lots of leaking last year. Tested it yesterday and it is leaking at the cowl seam or...
My 1967 Buick 225 v6 has 71000 original miles and it is running very well with a newly rebuilt carb. As far as I know it has been getting 30 wt...
After rebuilding my carb and addressing fuel related issues I have been advised to put in an additional fuel filter on the other side of the fuel...
I have a late 60's/early 70's Warn series 8000 winch on my jeep that my dad put on back in that era. Model I think says 5721. It has the 3...
Jeep was running great all month. Leaving Friday for Rubicon weekend. This week had an issue pulling a grade at 50--lurching and sputtering and...
I have the factory D44 rear end and for the life of me I cannot find any vent hole. Where should this vent be? Does it no have one? Does it need...
Separate names with a comma.