Does anybody know the size and/or the part number for the freeze plug that goes in the back of the engine to seal the camshaft bore. My rebuild...
The large gear (46) that slides in the case to dis/engage the front driveshaft, is it only supposed to make partial contact with the intermediate...
I am having a problem getting the short shift rail to properly line up on a single stick transfer case. Does the shift fork on the front output...
For those who have painted there engines with the Nason or Duplicolor paint, do you use any kind of primer or just shoot it straight to the engine?
Would like pictures or some kind of explination of the brake line routing on a 71 jeep cj5, primarily from the prop block out. Bought aftermarket...
What would cause the trans to lock up between 2nd and 3rd gear when shifting?. I pulled the cover off and everything looks okay, and i drained the...
Has anybody used the Quadratec 21 gallon fuel tank in there jeeps? The new tank uses a fuel tank strap, unlike the original tank, and i was...
Tried the search function without any luck. What is the torque spec for the bolts that hold the backing plate and spindle to the knuckle. Thanks...
One of the Prestolite distributors spins backwards from the other three offered. not sure how to adentify, but they are out there. i currently...
I was wondering if anybody has converted their jeep to a 5-speed trans. I am currently running the stock T-14/Dana 18 combo behind a soon to be...
After doing some research on this site and on the internet, i am still wondering if a 231 EF intake manifold will fit on a 225 OF. I read here...
These are the bumpers i built for my 71 CJ5. i designed them myself, but obtained the ideas from several different styles and ones i had seen...
In the process of replacing the rearmost crossmember on my frame. I purchased a new one from omix-ada. i went to bolt it on and found that the...
Separate names with a comma.