Ok, guys figured id share my rebuild. Jeep was running and driving so this is just a clean up project. Pulled it in the shop Christmas Eve and...
Going to use a GM tbi on the jeep and want to know if anyone knows of a good place to get a detailed wiring diagram? i got the whole harness from...
Ok, am working on a cage for the jeep and want to do a frame tie in but have heard various things about it. i want it to be strong but i have...
was wondering how the driveability on the road is if anyone knows. planning to link the rear of my 5 and was debating using my air shocks. they...
Im working on springing over the 5 this weekend, question is what length shocks are you guys that are spring over running to get the most travel...
Im building scout axles to go under my 5, question is are scout spindles the same as waggy spindles? except for the fact that scouts are eight lug...
is there a way to weld on them and prevent warping or keep it to a minimum? im going spring over on scout 44's so have to weld on some perches.
I have a question about a D30 all new everything, i mean everything down to the lug nuts(i know because i helped to rebuild it) with 4.27 gears...
Will a 420 bolt up to my bellhousing w/o the use of adapters? i currentlyhave a t14 to a 225.
Which would perform better cj springs or yj springs? im looking a the RE4.5 extreme duty kits they offer for both a yj and cj. i know that i will...
What lift kit holds its height the best? and has the best travel? i currently have a superlift 4" kit and it has sagged a lot and its only been on...
i have replaced the master cyclinder and have disc brakes so i have a inline 2psi pressure valve. ? is this master cyclinder is not like the stock...
will the stock spring plates work with d30 u-bolts or should i get new plates?
I should be getting my new gears today. i am familiar with how to set them up as i have done so in the past. Question is where can i get a decent...
I am doing a p/s swap in my 71 and am using a yj box. Question is will a cj pitman arm work on this box so it doesnt have so much drop. say one...
I have a guy at my local FLAPS. that has a narrow track dana 30 (disc brakes) and a dana 44 for sale. He wants a $100 for both. Is this a good deal?:?
Has anyone used a chevy style steering box? i have one off a 77 camaro and it looks like the saggy.:beer:
I have headers with side pipes and they are non baffled style and i was wondering if there is a way to quiet them done? is there a way to make a...
I have a chance to get a older scout, not to sure the year yet but i know it either a 80 or 800 model. if it has dana 44's i want to put them...
Do they provide any lift over stock?
Separate names with a comma.