Should run fine - most auto's were 331 and the stick 373
Here is the link to a picture. It is the 3-piece rear frame cross member. From what you described, my guess is somebody tried to weld on the...
I have the rear frame sections that the spring hanger shackle bolts attaches to. I also have the bushings mark justjeepsters.com
Anyone know where to get a harmonic balancer for a 72 commando with a 304? It is a 3-bolt style. I am looking for a new or good used one
OK thanks
Just rebuilt the carb on my 67 225. Should I fill those slanted holes in that are on the carb mounting surface of the intake? I could use JB...
So what I get from this is that as long as I have a 231 odd fire motor - a 225 intake will fit?????
Thank you. I did just that and the casting number is a 231 odd fire. So I am thinking that a 225 intake, carb, and distributor should work?????
Does the intake from a 231 fit on a 225 jeepster motor?
No problem and thanks for the additional info on wiring - it always an issue with the jeepster
I also have them new, but have several complete used ones as well. I have never tried the EZ
I am sure I have some used an one NOS left. Email me at justjeepsters@aol.com
Hey you were right. I put her all back together and everything worked out great. I drove her everywhere yesterday
Here is the deal. I have this convertible that just ran like crap. I checked about everything including a compression test. All the numbers were...
I have a 71 jeepster commando and I would like to put some front and rear lift shackles on it. Maybe just and inch or two. Does anyone know of a...
I could not find that part number on the site. I would like to know more about what you did - it looks and sounds great. MigMan, what was the...
Thanks for the info. The points I was using were new - well from who knows how many years ago. I have boxes of parts and I had used a set of...
OK. Thanks for the info. I did all of that, but still no spark. I also changed the coil. Is there something electrical that could be causing...
The Jeepster is a stock 67 with the 225 and automatic. I replaced the dist. It is a Delco style standard ignition. I added new points, rotor, and...
Separate names with a comma.