I've been running a fsj 44 with ford knuckles-out for the last year, it works great. FSJ's came widetrack and narrow track, 65" and 61". I...
I boxed my frame front to back with 3/16. I cut the factory front "box" out and redid that too. I made a continuous weld, no cooling off...
I got rid of the front crossmember in my jeep when I mounted my winch. The grill is mounted with two rubber bushings on top of each frame...
I heard the cable setup didn't work to good-that's why they switched to linkage after only 1 year. I went with hydraulic on mine-it works great.
I'm skeptical on ditching the pumps bypass system. Prolly 4 years ago, I dented the bypass housing on my pump with my diff. Wasn't a problem...
Set the front axle on jack stands. Spin the tire and use a pen to scribe a line around the tire(use a steady rest). Do the other tire the same...
304-NP435-D300 I shaved about two inches off the bottom of the tranny. Just piece of flat stock welded to the crossmember tube for the adapter...
Twisted Customs 605-923-7288 Ask for Brian. They have all sizes of bushing kits (outer sleeve, poly, inner sleeve, and bolt), lazer cut...
Here's what I saw in my club last year. FWIW everybody runs alloy axles and a full case detroit in front. Broken stub axles destroy spindles,...
It won't handle any differently than it did before.
I'm running different sized tires on my truck :D . 265/75 vs 245/75 or something like that. Pretty squirlly and bucky driving down a snow...
White fenderwells scream fiberglass.
Looks like an anti-skid plate.
Quiz the guy that runs this show http://www.bulltear.com/index.php
I flat-topped a set of late 70's Ford knuckles for my 5. I made up my own bolt pattern and made my own arms. A friend also runs an identical...
The less bolt-ons the better. I completely redid my 5 last winter cause the body and frame and driveline were all doing their own thing, it was...
8274 will still be worth something in 20 years...
Re: Cooler Rack/Lverage on taire carrier This would be a good application to use a "double shear" type mount for the hinge.
Git them shackles outta there so they don't jab into rocks-n-logs....plan on long travel driveshaft stuff too. That axle's gettin forced forward...
Fixed mount.
Separate names with a comma.