Does anybody have a flaps part # for a 72-75 steering shaft u-joint?
I changed over to disk brakes a year or so ago on the front end. and have not had any problems till recently. The disks dont want to release. it...
Does any one know what the measurements for float level and drop are off the top of their head?
I am having a hard time with the timeing. Set it at 5* btdc with the vac. advance unpluged on the hei. motor sounds fine till you give it the gas...
has anyone built a mount for one of these winches? any pictures would be a great help.
I am trying to remove the carrier and ring gear from a dana 27 frontend to replace the inner axel seals. Axels are removed ,bearing caps off is...
Just pulled the knuckles off to rebuild. and the tapered bushings are wore where the tierod bolts up. Can the bushings be replaced or do I need a...
It sounds like the bearings are starting to go out in the tranny so I have put a tran/transfer case rebuild on my list of things to do. So I...
I am in the process of changing over to 11" rear drums. When I removed the backing plates I discovered the axle seals were shot. To change the...
I just picked up a dana 30 front end with disk brakes. besides the 1-1/8 rotors will the caliper mounting brackets work on the dana 27 or do I...
Does anybody have a picture of a stock delco odd fire distrubuter cap showing the position of the #1 plug wire
Separate names with a comma.