This happened last week, haven't driven it since I heard the noise...much. I started it up and immediately heard a knocking. I shut it down...
I have snapped a few clutch release cables in the past 2 years and I am always adjusting them. I have purchased just straight up replacements so...
This day has been a real treat. The batteries in my truck are dead but that is not what this post is about. Tonight I found the battery in my...
I have a cracked leaf in one of my rear spring packs. The springs are old anyway so I will get new springs instead of messing with the old ones....
I am not talking building fenders from scratch, I want to cut my fenders down to a Flattie look. Besides buying a Flattie, are there any...
I have been doing some reading lately about what it takes to build and tinker with axles. I am talking some major fabrication work here too....
After reading the responses to my post a few days ago about my engine missing, I decided I would just change the points and condensor first since...
My engine has a serious "miss" lately. It doesn't constantly miss and doesn't happen at acceleration more or less (I don't think it is an advance...
Where would the sending unit go? This is going to be an electric gauge in place of my broken Auto Meter clock. :)
Are you guys like me when you go to the auto parts store you have a list of what parts are from what year and possibly make? My Jeep is a 1966...
I have been checking this forum for months for getting ideas on a suitable tire carrier. I wanted to stay away from mounting it to the rear...
If I wanted to tow my Jeep without the use of a trailer, would I be better off removing the rear driveline or is it good to put the TC (Dana 18...
I first had this problem back in July and hasn't been an issue until yesterday. It seems this is a common problem after checking the board but I...
A few months back I wrote I was having trouble shifting my transmission and finally something froze and I ended up stretching my clutch cable. I...
I installed a new cable a few months ago after the old one snapped. I have been adjusting it every few weeks until today it seems like it...
I shouldn't say my Jeep overheats the way it used to but it doesn't stay at 180 degrees either, even in winter. I have had the radiator rebuilt...
My passenger side wiper linkage is worn out. Does anyone have the length of that arm (might as well get the driver side too)? My Jeep is a '66...
So I took my Jeep in to get it aligned, the drivers side hub is tilted out quite a bit (castor?) which might be normal but I wanted it checked....
I replaced this bearing not too long ago and there is still a fair amount of slop. I am not happy with the setup at all. I have a stock tube and...
My Jeep is a '66 and it has the '71 windshield with the wiper motor mounted outside in front of the driver side windshield. My problem is, I...
Separate names with a comma.