The Shifter slips out of the slots... it does not jump out of gear. Does this help. When the shifter slips out, then the trany stays in 4th...
I have a 1982 Jeep CJ-5 with a T-176/177 transmission. The shifter on it keeps slipping out of gear. My mechanic guy says there is supposed to be...
I believe it is a mechanical oil pressure gauge. It has little brass tubing that goes from the engine to the gauge. Seems to have some oil in this...
I have a gallon of Mystery Oil, so I am gonna put that in the oil and see how that works. Then I will try the transmission oil.... The...
I have a '82 CJ-5 that I just had new pipes and a Flowmaster (40 Series) installed yesterday. Muffler is wonderful. My son thinks it sounds cool....
:D Life is one trial and error after another. After completing some minor repairs on the jeep cj-5 and planning a Monday after school...
Everything is pretty straight forward. Here is a hint. Use small zip lock bags to keep each set of bolts that you take off and mark them as...
I don't have a picture but can tell you from recent experience that the tranfer case has to sort of slide in angled down and angled from the...
Put the t-176 in a 1982 CJ-5. The CJ had a t-177 when I got it. Now I am going to rebuild or repair or fix the t-177 and keep it for a spare....
What is so hard, was for me I am a lawyer, not a mechanic. The transfer case is small and heavy. Very awkward to handle. Trying to line up the...
The jeep had a t-177 put in a rebuilt t-176. So the transmission that I will be rebuilding is the t-177.... smile I have no idea how the t-177...
Found couple at Carquest Bought two rotors at Carquest for 25 a piece. These are made in China. Heck, I thought Carquest sold 'Murican...
Okay guys and ladies, If you have never changed a tranny on a jeep cj, then consider yourself lucky. The tranny was the easy part. That dang...
Who makes the best rotors for a 1982 CJ-5? What pads? Are the ones sold by Autozone or O'Reillys about as good as any others? Thanks...
Anything I can do to fix this? Can I tap it in with a small hammer? Thanks, Paul G.
I have Jeep CJ-5 with t-176 and Dana 300. The Dana 300 has two shifting rods, with a metal bridge connecting them that the shifter fits into....
I noticed that my Jeep 1982 CJ-5 with 258 inline six. The driver side motor mount only has one bolt holding it on. There seems to be two...
Brand New PCV and other stuff Brand new PCV and hose. With clamps. New Valve cover gasket, oil pan gasket, and other hoses. I don't know how...
Update on our Father/Son Jeep CJ-5. We successfully installed a Motorcraft 2100 onto the inline 258.... she ran like crap at first.. but then...
Changed the Valve Cover The valve cover gasket has been changed. There is no leak from the valve cover. However, now it seems to be the oil pan...
Separate names with a comma.