I'm looking for a parts list or exploded view of the Warn Automatic hubs that were available for 72 -80 CJs (6bolt) I think the model is 241. Not...
I have a set of Warn automatic hubs on my 80 CJ-5. Recently I've noticed a loud grinding(?) sound that occurs intermittently when drivng at ;ower...
One of the guys on Jeep forum has a problem with his D18 leaking at the rear output. Years ago I owned a 64 CJ-6 and I seem to vaguely remember...
Does anyone have the above instructions?
I just bought a new Toyota Prius so I'll have to park my 80 CJ-5 in an old garage at another property I own. Problem is that it gets dusty as...
One of the guys on another forum has a tapered axle D44 with a FF conversion. Upon removing the axleshafts, the Power Lok axle spacer buttons...
Does anyone have the diff side bearing cup and cone numbers handy for a D30?
I posted this on the Commando forum but notice that traffic there is kinda light. A fellow on Jeepforum.com came across a 70 ish Commando...
A fellow on Jeepforum.com came across a 70 ish Commando with a D44 having 1.15 x 27 spline axles. Are there any D44 factory 19 or 30 spline axles...
I've been corresponding with a fellow who has a 79 CJ-5 with T-18 and D20 t/c. The fellow he bought the Jeep from swapped in a 44 from what I...
About 2 weeks ago I installed a set of Skyjacker 2.5" soft ride springs to my 80 CJ-5. A week later I installed a Warn 8274 winch which caused me...
A friend has offerd me an old 19 spline powerlok. Can I change it to 30 spline by just changing the side gears? Some where I read that the newer...
A friend has offered me a flanged axle D44 rearend out of a 69 Commando for use in my 80 CJ-5. Is this rearend the same as the D44 used in the...
I've been getting drive shaft vibes at 35-40 MPH. I got under and measured the pinion and t/c output yoke angles and they are: Transfer case...
I bought a NOS Whitco top for my 80 CJ-5. It's brand new with all the hardware, instructions, etc. It seems to have shrunken slightly and I'm...
I've always wondered why I never see or read about the 292 being swapped into CJ's. I woud think it would be a good replacement for the 258. My...
My 80 CJ-5 has manual front discs and 10 x 1 3/4 rear drums. They were rebuilt about 2 years ago so they are in good shape. I used to run 31"...
A fellow jeeper is installing a one piece axle set in his CJ-5 AMC 20 rear. He's been having problems with one axle shaft binding when everything...
About a year ago I purchased a set of really nice Jeep CJ front seat covers from a fellow on Ebay. I believe he ran a business in Oregon and...
A friend just called and he has a Dana 44 rear out of a 69 Commando that he wants to get rid of. Questions: 1. What is the WMS to WMS width...
Separate names with a comma.