Ok, stumped a little here. going through the Spicer 20 TC, It has obviously been opened up before. there is a spacer on the front output shaft...
Hello All: Glad to see this site up and running, I lost it a few years back (don't know what happened) any way, doing another 74 frame up,...
Hello All: Working on the wire harness,,,, 1974 CJ I258 T-18 4spd.... what does the Transmission control spark switch do and do I need it. The...
Hello All: Well the wifes remodle is near done so I have permission to continue my jeep thing YAAA. Haveing trouble keeping a tight valve...
Howdy all. Found a couple inline 6 blocks. Wondering what you think they are worth. Numbers are,,,,,6 9a05 and 6 4 a 05. So the best I can...
Howdy all : Having trouble finding the right timing cover for my 74 cj 258 I6,,, all the usual sites have the wrong cover up and list it as...
Howdy all: Been A while... looking for the light housing that attaches to the speedo cluster. It is the one that comes from the alternator (grey...
Howdy all: Ok finished my build a year or so ago, frame up, has 6000mi in everything new. Had to take the exhaust and intake manifold off today...
Howdy all: OK going to reindex the rear axel on my 74. I bought a pair of Currie anti wrap spring perch for the Dana 44. These perches are a...
Howdy all: wearing out the U joints in no time. Put a 3" lift and the angles are to drastic. Does any one know who the best outfit is to get a...
Hello all: Restored a 74 with t-14 3spd. have 3" lift and the u joints did not last long. The angle is pretty harsh. Any input on re indexing the...
Hello all: Have a 74,,, thinking of cutting an inch off the top of the steering column. I have to fabricate a new nylon bushing at the base any...
Are the heater box and emergency brake pedal assy the same between the 73 & 74 cj,,,,, I imagine it is but u never know... any help appreciated...
Howdy all: Have an opportunity to pick up a 1964 cj steering column w/ wheel & spartan turn signal. refurbishing a 74,,,, are the steering wheel...
Hello All: Well I went and did it again,, just finished with my restore of a 74 and went out and bought another one.... couple parts missing on...
Hello All: Well got the thing going after 8 years. The valve cover leaks like a sieve. I used a cork gasket and had to use the original valve...
Hello all: Well it fired off tonight after an 8 year frame up restore. My question is what should the timing be set at. It is a 1974 I-6 258....
almost ready to turn the key[IMG]
Any pics of the clutch and brake pedal return spring will be greatly appreciated. I have the clutch return spring but not the brake return spring....
IMG_3377.jpg KK have the alternator wired as the jeep manual diagram shows. the alternator light on when the ignition is off. The post where...
Separate names with a comma.