Guy, Thanks for some feedback. Yes my driveshaft is a slip joint, i never knew it could come apart into two peices, if my memory is correct the...
Does this seam right. some time ago I disassembled, cleaned, put in some new seals and gaskets, and reassembled my Dana 18 transfer case, put it...
i forgot to mention i have stripped most of the paint off of the SS body, here are a few more pics i forgot to paste...
Guy, looking for some input on how much $ i should be asking for in selling my Stainless Steel 1970 CJ5. I got it from my dad after he passed...
Thanks for the feedback guys. My steering box is a saginaw, and it looks like the caster shims are needed as well. I was also thinking of some...
Pics of the 2" skyjacker softride spring lift and the 6" long shakles i fabricated. i also stripped more paint off of the stainless steel body. By...
Cool, thanks for all of your input guys, It sounds like I will be ok. when I fab the new shackles 6" c to c I am going to drill some extra holes...
I installed my 2" skyjacker springs on my 1970 cj5. It gave me 2" in the front and 1" in the back, and it is not quite as high as I was hoping...
Eriki, If you are out there I could not respond to your private post. the seats are Smittybilt Standard Bucket seat, i fabricated the frames out...
Thanks Patrick, that is to easy, thanks for showing me that. As Patrick said it was made by Jewel in the Phillippiens in the early 1980's. Right...
I have tried to put larger size pic directly on the thread from my photobucket like i see so many people do but i can't fugure it out. If someone...
Ron, I am not sure what you mean about the horse shoe clips. Here is how i am hooked up now. There is a custom fabricated half round guide...
My 1970 cj5 parking brake is located to the far left under the dash with the cable running from the engine compartment under the tub to the trans....
I did some quick measuring last night and it looks like i will be getting close to 4" of lift just like you guys did. After you guys put your new...
Hey Patrick, I did take that into consideration on how bad the stock springs have sagged. If the picture of the off white rig with the tan top...
Question, i just purchased 2" skyjacker leaf springs all the way around my 1970 cj5. i just wanted to make sure before i install them that i am...
[IMG]
In my 1970 stainless body cj5 I have dual fuel tanks, one under the drivers seat and the other in the rear under the tub and the rear seat. Can...
Thanks for all of the feedback guys, Lynn, you have totally convined me that the softride is the way to go. I might have to save a few more...
Thanks alot Patrick, i think you have made up my mind and the skyjackers are the way to go. what shocks do you recommend with the softride springs.
Separate names with a comma.