Ok, I checked it out again. I also took more pictures and put them on my Webshots page. The water pump boss definately says "3543202". I took a...
It does have three plates on the dash. One for top speeds, one with the Willys logo, and one with the shift patterns. They're a little hard to...
That was the number cast into the block above the water pump. I'll have to check above the oil pan tomorrow to see if I can find anything else....
Ok, got the number off the motor and it doesn't match the serial number found on the frame or the body. The body/frame # is 79246 and the motor #...
Ok guys, thanks for the help. I'll take pictures this morning and post them in the garage section later today. Am I correct about the carb? To...
Is there no way to match the serial # to the motor? I know the motor is a L-Head but I was just curious if it was the motor that originally came...
I just picked up a new project this weekend: a '46 CJ2a. The body and frame tags both match but I couldn't find a tag on the motor to tell if the...
I could be mistaken, but I *think* they're 2.75 inches. I know this has been discussed here before and if I remember correctly, that was the...
Why would you want water when you could have beer!? Now that's a refreshing shower at the end of the day ;)
Yea, not 6". 3-4 tops. If you do go look at it make sure to get underneath and see what those diamond plate pieces are covering up. Those are...
What Tim said is correct, although backwards. My prop rod connects to the hood on the passenger side and pivots from there. There are clips on...
I thought about tying into the frame but ended up not doing it. I attached my cage to 3/8" plate at the six points so that the cage wouldn't go...
I have outside-frame headers and some cherry bombs that exit before the rear wheels. I had to turn the tips towards the center and it made a huge...
That might have something to do with it! ;)
Separate names with a comma.