1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Recent Content by Bomb bee

  1. Bomb bee
    Post

    Just another Disc conversion question ....

    It is all machined and assembled ,seems to be working fine with which ever check valve is in the m/c, master is off of a 77 with discs ....I think...
    Post by: Bomb bee, Apr 19, 2013 in forum: Early CJ5 and CJ6 Tech
  2. Bomb bee
    Post

    Just another Disc conversion question ....

    Where would that come from ? Napa?
    Post by: Bomb bee, Apr 18, 2013 in forum: Early CJ5 and CJ6 Tech
  3. Bomb bee
    Post

    Just another Disc conversion question ....

    Yes , I checked the part numbers ,and for once they were right ,lol. The drums were on the outside of the hub,but there is a small machined...
    Post by: Bomb bee, Apr 17, 2013 in forum: Early CJ5 and CJ6 Tech
  4. Bomb bee
    Thread

    Just another Disc conversion question ....

    Trying to convert my 68 dana 27 to disc from 11" drums ,my problem is the new rotors, I bought which fit a scout measure 3.74 in the center hole...
    Thread by: Bomb bee, Apr 17, 2013, 10 replies, in forum: Early CJ5 and CJ6 Tech
  5. Bomb bee
    Post

    Another v6 aluminum radiator option

    You don't happen to remember what the number for your lower rad hose was do you ? or what it fit ? Thanks
    Post by: Bomb bee, Jan 26, 2013 in forum: Early CJ5 and CJ6 Tech
  6. Bomb bee
    Post

    rear axle removal

    Does any one know of a way to get the broken end of the axle out of the carrier gear without pulling the carrier apart ? can you drill the pinion...
    Post by: Bomb bee, Aug 26, 2010 in forum: Intermediate CJ-5/6/7/8
  7. Bomb bee
    Post

    cooling fan recomendations...

    That's what I did to my dauntless,worst thing I ever did ,stay with the stocker...
    Post by: Bomb bee, Aug 1, 2010 in forum: Early CJ5 and CJ6 Tech
  8. Bomb bee
    Post

    Master Cylinder leaks

    The seal is attached to the cap with little tabs,but it looks good
    Post by: Bomb bee, Jul 24, 2010 in forum: Early CJ5 and CJ6 Tech
  9. Bomb bee
    Thread

    Master Cylinder leaks

    Help I have a 68 cj5 that the PO switched the master cylinder to a newer firewall mounted unit when he upgraded to 11" drums (era 1974). It was...
    Thread by: Bomb bee, Jul 21, 2010, 7 replies, in forum: Early CJ5 and CJ6 Tech
  10. Bomb bee
    Post

    Frozen 225 What to Save?

    Do you remember where in Nova Scotia?:rotflmao: Will a dauntless bolt up to the 4cylinder bell housing?
    Post by: Bomb bee, Jul 12, 2010 in forum: Early CJ5 and CJ6 Tech
  11. Bomb bee
    Post

    Heat shielding

    Thanks
    Post by: Bomb bee, May 26, 2010 in forum: Early CJ5 and CJ6 Tech
  12. Bomb bee
    Post

    Heat shielding

    Would it work best fastened to the body or muffler?
    Post by: Bomb bee, May 26, 2010 in forum: Early CJ5 and CJ6 Tech
  13. Bomb bee
    Thread

    Heat shielding

    Does anyone have any idea's for heat shielding material between my headers/mufflers and the floor pan? Thanks
    Thread by: Bomb bee, May 26, 2010, 7 replies, in forum: Early CJ5 and CJ6 Tech
New Posts