1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Recent Content by chicklin

  1. chicklin
    Post

    Hardtop Questions

    Pic below. It closes the gap between the top and the indentation for the gas filler neck. Not required, but would make things tighter. [IMG]
    Post by: chicklin, May 15, 2011 in forum: Early CJ5 and CJ6 Tech
  2. chicklin
    Post

    need help, no spark

    Coil?
    Post by: chicklin, May 14, 2011 in forum: Early CJ5 and CJ6 Tech
  3. chicklin
    Post

    69 body on a 61 frame?????

    I don't know about the DJ's, but if it was a CJ a 69 body would fit on a 61 frame with no modifications. I don't think you'd even be able to tell...
    Post by: chicklin, May 11, 2011 in forum: Early CJ5 and CJ6 Tech
  4. chicklin
    Post

    T90a

    For the t-case, I was able to squeeze the quart bottle enough to squirt it up into the hole. You just have to refill the bottle a few times b/c...
    Post by: chicklin, May 9, 2011 in forum: Early CJ5 and CJ6 Tech
  5. chicklin
    Post

    Rear Seat

    Well, the TJ seat in the ad is about 40", so no go there.
    Post by: chicklin, May 9, 2011 in forum: Early CJ5 and CJ6 Tech
  6. chicklin
    Post

    Rear Seat

    Don't know, personally, but I emailed one of the guys in the ads asking to measure it, so I'll know for sure.
    Post by: chicklin, May 8, 2011 in forum: Early CJ5 and CJ6 Tech
  7. chicklin
    Post

    Rear Seat

    Ha, you nailed it. Should've checked there, but I wasn't sure what would fit. Thanks!
    Post by: chicklin, May 8, 2011 in forum: Early CJ5 and CJ6 Tech
  8. chicklin
    Post

    Rear Seat

    That's just seat covers, isn't it? I'm talking about a whole seat (frame, mounts, etc.).
    Post by: chicklin, May 8, 2011 in forum: Early CJ5 and CJ6 Tech
  9. chicklin
    Thread

    Rear Seat

    Anybody use this utility seat for a rear seat? http://www.northerntool.com/shop/tools/product_32194_32194 Based on the dimensions, it looks...
    Thread by: chicklin, May 8, 2011, 10 replies, in forum: Early CJ5 and CJ6 Tech
  10. chicklin
    Post

    V6 Fuel Sending Unit

    There are different kinds of guages/sending units. Ones that read full with no power and ones that read zero with no power. If you mismatch the...
    Post by: chicklin, May 8, 2011 in forum: Early CJ5 and CJ6 Tech
  11. chicklin
    Post

    Bad Headlight switch blowing fuses

    Does the switch otherwise function normally? If so, I would agree. Mine was blowing fuses, but the switch was going bad b/c you had to wiggle it...
    Post by: chicklin, May 8, 2011 in forum: Early CJ5 and CJ6 Tech
  12. chicklin
    Post

    Bad Headlight switch blowing fuses

    Where did you order from? I just ordered and installed one from Morris 4x4 Center that works great. Seems to be well-made, but we'll see how it...
    Post by: chicklin, May 7, 2011 in forum: Early CJ5 and CJ6 Tech
  13. chicklin
    Post

    body tub shims

    So, knowing that this is years of cobbled together mess, where were the actual bolts and rubber mounts from the factory?
    Post by: chicklin, May 6, 2011 in forum: Early CJ5 and CJ6 Tech
  14. chicklin
    Post

    body tub shims

    Oh, man, well, here's what I've discovered. The aforementioned piece of wood (just behind the right-front wheel, directly below the cowl):...
    Post by: chicklin, May 5, 2011 in forum: Early CJ5 and CJ6 Tech
New Posts