This thread was helpful so to hopefully add something helpful: 1. I found a CLAH (cheap little air hammer) to work better than a BFH with the the...
Wow!? this site is back up? I dunno, i'm still not taking a running motor apart for a cam and not buying a header without guaranteed performance....
From my recent experience: 16-19 mpg driving straight down the mountain for a day driving in the flatlands of the valley and back again. 11-13 mpg...
Good idea added to to-do list ;)
Agree w/ Patrick. The point was that you just need an OEM coil, not an over priced super duper special coil :)
Mostly agree. All multiple spark functionality quits at 3k rpm on most all boxes. 6a new ~$180 6a used ... should get one for ~100, they work or...
Mine was hard to steer when I put the stabilizer on too ... I cranked the nuts till the rubbers bulged. So, now I set the nuts so that the rubbers...
I'm sorry, I don't seem to be getting email notices till 3 days late and just tripped over your last post. At present, I don't have time to check...
I have never, and will never, own a vehicle with conventional steering (aka, tierod - not rack & pinoin) that does not have a steering stabilizer....
WOW! Feeds and welds like a new welder! (Well, what I think a new welder works like, never had one). Thanks again for the help!
Thanks very much guys! There are 2 very minor kinks in the liner which sounds like the most probable problem. I'll get another liner and go from...
I'm a bit new to wire feeds when it comes to problems with them. I bought a used Handler that had wire jamming just past the feed rollers. I...
Ok, MSD is off and back to points. What's the dwell? Are the points actually opening when viewing using a remote start button? I'm not thrilled...
Even when you adjust the Ross box as aggressively as I do, it should NEVER be stiff with the wheels off the ground. :)
Separate names with a comma.
