1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Recent Content by blownfuse

  1. blownfuse
    Post

    Propane conversion on F-134

    I have propane on my f-head, I work on fork lifts so parts come easy. the problem that I had was that there is no lead in propane, so burning the...
    Post by: blownfuse, Jan 5, 2007 in forum: Early CJ5 and CJ6 Tech
  2. blownfuse
    Post

    running poorly - F-head

    Do you have a skip? my engine ran like crap, turned out to be a leaking exaust valve.
    Post by: blownfuse, Jan 5, 2007 in forum: Early CJ5 and CJ6 Tech
  3. blownfuse
    Post

    Solex Question

    I put one on my 55 cj5, I backed off the idle screw turned the air mixture screw in until it would run rough, then back it off 1/2 turn the carb...
    Post by: blownfuse, Dec 25, 2006 in forum: Early CJ5 and CJ6 Tech
  4. blownfuse
    Post

    master cylinder cover

    I have the same master cyl, I put a reservoir mounted to the fire wall with a hose to the top of the cap on the master cyl,works good. just a idea...
    Post by: blownfuse, Dec 25, 2006 in forum: Early CJ5 and CJ6 Tech
  5. blownfuse
    Thread

    vac. advance on a f-head

    Has anyone tried to install a new style dist.w/ vacuume advance on a f-head? I was thinking of installing a new style dist. on my 1955 f-head,any...
    Thread by: blownfuse, Dec 25, 2006, 2 replies, in forum: Early CJ5 and CJ6 Tech
  6. blownfuse
    Post

    onboard welders

    Thanks
    Post by: blownfuse, Dec 10, 2006 in forum: Early CJ5 and CJ6 Tech
  7. blownfuse
    Post

    pertronix question

    I have installed one in my 55 f-head it worked great until I smoked it trying out a electronic ign. coil, stick with a standard coil with a resistor.
    Post by: blownfuse, Dec 9, 2006 in forum: Early CJ5 and CJ6 Tech
  8. blownfuse
    Thread

    onboard welders

    anyone installed a altenator as a welder on a f-head?
    Thread by: blownfuse, Dec 9, 2006, 3 replies, in forum: Early CJ5 and CJ6 Tech
  9. blownfuse
    Post

    oil pressure

    Mine does the same thing I think my oil is a little to heavy 20w50,help keep the rattle down,lol
    Post by: blownfuse, Dec 7, 2006 in forum: Early CJ5 and CJ6 Tech
  10. blownfuse
    Post

    T90 Rebuild

    I just rebuilt my t90,I installed the truck gear set,with the short input shaft, I love the lower first and second gear. I left the oil slinger...
    Post by: blownfuse, Dec 7, 2006 in forum: Early CJ5 and CJ6 Tech
  11. blownfuse
    Post

    lincolnlock dana 25

    I have power steering that will help, I want to go to tellico this spring,but need to be locked up in the front. No money for lockers,married with...
    Post by: blownfuse, Dec 4, 2006 in forum: Early CJ5 and CJ6 Tech
  12. blownfuse
    Thread

    lincolnlock dana 25

    I am thinking of welding up my dana 25,it is mostly a off road jeep
    Thread by: blownfuse, Dec 3, 2006, 29 replies, in forum: Early CJ5 and CJ6 Tech
New Posts