Hi everyone, Does anyone know what the factory part number for the rubber mount between the transmission crossmember and the factory t98...
Here is a detail shot of my welds on our cage in our CJ-2A. I use an Airco 250 (like an Esab 250), er70-6 .035 wire, and Praxair Stargold c-25...
Thanks NFZ for making it easy on me!, I will give that one a try. Daniel
We sealed up a rollcage for use as an airtank once, afterwards we punched some numbers on the actual volume of the roll cage, and for all the work...
A great source for air tanks are off of commercial trucks and semi tractors in the junkyards, the tanks for their air brake systems are usually...
Hi everyone, I am putting a Holbrook 3" long leaf spring kit on our '46 cj-2a, and it looks like I will definitely need some longer than stock...
Hi, here's some pics of the cage I built for our 46 2A two years ago...The whole jeep is in the middle of a frame up resto-mod. The plans are to...
One thing you can try is a chemical called acrysol, it is similar to acetone and it is used by many auto body shops. It is very slow to disolve...
Just for reference, The earlier t-90 oil collectors do work when converting to the t90C gear set. I just finished a rebuild of one this...
Hi, One thing to check before you tear into the transmission... the t-90s are known for the shift rail plugs popping out, especially after off...
Ditto on the pie wrench idea, but I bought a large one cheap from a rummage sale, and then I ground the clamping teeth off flat, that way the...
You are running these Dakota springs SUA and getting 2.5 inches of lift or more, correct? Or are you running them SOA?
Hi All, In case your seal is the culprit, Timken makes a nice double lip seal for the transfer case outputs and it is muck better than most of...
Separate names with a comma.
