Ok, so I tried to do a cheap lift and now I'm paying for it in other ways. I put on 2 1/4" shackles thinking that this would be a cheap way of...
Cool. Thanks for all your advice! I really appreciate it!
I finally got my hands on a Ford T18 and have decided to get a Dana 300 to mount behind it for my 72 CJ5. Does anyone have any advice on this? I...
Thanks guys for all your advice. I spent a good hour and a half messing around with the allen wrench hole, trying to "loosen" the pulley wheel....
I'm trying to remove the pulley from my power steering pump, but am having one heck of a time doing it. The pulley has a hex hole in the center...
The steering box was about 170 bucks at the auto parts store along with a core charge (mine was $200) and, yes - you can use the same three hole...
I have a '73 CJ5 with manual steering that I am trying to upgrade to power. I went to the auto parts store and bought a power steering box for a...
Thanks all of you for your advice. I especially like the detailed rebuild instructions for the T18. Hopefully, I can get this all together...
I would check your driveline angles. I had all kinds of problems when my angles were off. Remember, the centerline of your tranny/t-case must...
Nice picture, HudsonHawk! Now I have a general idea on the different sizes of these trannies. I'm not sure what my T18 came out of. All I know...
I have some questions about swapping a T18 tranny into my 1973 CJ5. Currently, it has a wimpy T15 three speed connected to a AMC 360. I've...
Separate names with a comma.