Thanks for the response Mike, wasn't aware about the body interference's either.
I will have power steering and lock-out hubs. So what would perform better when one tire is lifted off the ground in the front, the Powr-Lok LSD...
I have a 1973 jeep 304 V8 from a donnor rig. Haven't inspected it internally yet, but believe it is still stock. Came with headers and non-stock...
I plan to start a build on a 1974 CJ6 and have a couple axle option questions. I have a D30 Power-lok LS I could install in the front axle, but...
Remove the top, fold the windshield down.....wear safety glasses for the bugs.
I am doing the CJ2a to CJ5 frame now. My biggest issue was fitting a large radiator, 1966 mustang version. Had to modify the front crossmember....
Thanks for the great feedback. I like "AKCJ's" idea about the location. I will check the manuf. of the unit I have.
I am building a CJ5 with PTO winch. I have a NOS brake lock, mechanical lever type, that I am contiplating using. Are they a good idea? Or more...
The filler neck looks smaller then my CJ5 15gal tank. Maybe this tank you have is an 80's CJ version? The frame widths are identical between...
I have a jeep that needs the rear floor replaced. I was thinking of using the floor of a pickup box. Cut it out, bend over the edges and weld...
When I did my 1975, I bought a rebuilt Master Cylinder for disc/drum (1979 in your case) and left the rest stock. I think I paid about $25 for...
I have a 47 CJ2A that I am considering putting a D-side tool box in the wheel house. I have seen this some where before, but unable to find...
Separate names with a comma.
