1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Need pic's of wheel house tool box for CJ2A project

Discussion in 'Flat Fender Tech' started by ErksBurgMN, Nov 22, 2011.

  1. Nov 22, 2011
    ErksBurgMN

    ErksBurgMN 200$ Jeep

    Grand Rapids,...
    Joined:
    Jul 9, 2010
    Messages:
    23
    I have a 47 CJ2A that I am considering putting a D-side tool box in the wheel house. I have seen this some where before, but unable to find again. Was this only a military jeep thing? And what years/model was this employed? I was thinking of modifing a spare under seat lid and support tool box, and placing them in the wheel house.
     
    ErksBurgMN, Nov 22, 2011
    #1
  2. Nov 22, 2011
    garage gnome

    garage gnome ECJ5 welder

    Western MA
    Joined:
    Jun 19, 2009
    Messages:
    3,127
    MB's had them on both sides. Basically a box with a lid in the back of the rear fender wells.
     
    Last edited: Nov 22, 2011
    garage gnome, Nov 22, 2011
    #2
  3. Nov 22, 2011
    duffer

    duffer Rodent Power

    Bozeman, MT
    Joined:
    Sep 17, 2009
    Messages:
    4,660
    GPW version

    [​IMG]
    [​IMG]
    How I made mine (extended the bed out to outer wheel well and then glassed in the bottom of the wheel opening so the resulting compartment runs under the entire wheelhouse:
    [​IMG]
     
    duffer, Nov 22, 2011
    #3
  4. Nov 23, 2011
    uncamonkey

    uncamonkey Member

    Greeley CO
    Joined:
    Jun 2, 2009
    Messages:
    2,104
    My first Jeep was a MB, I miss the extra storage spaces.
     
    uncamonkey, Nov 23, 2011
    #4
New Posts