Shift boot pics...

If your fill spout is on the drivers side you have a t86 then, not a t14.
Haven't checked since I put the twin stick on and the large yoke back on the front, but I used to check and fill the transmission visually thru the little panel, the larger yoke and the twin stick may prevent this now Patrick.

 

I hadn't thought about it, but I could probably fill my t18 thru there.

 

my t-14 fills from driver side also.

 

You don't have t14 then, you have t86. T14's are syncro'd in 1st gear and they have the fill on the passenger side not the drivers side.

 

Thought so!!

 

Finally got around to putting in my 1 gear shift boot, I bought the dual lever boot like Patrick had pictured to start with but mine came with the shiny stainless trim ring (Vanguards gonna be jealous) its a dana 300 dual lever boot is what it was listed for. I got both my boots off ebay for a total of $34.45 shipping included. Heres a pic of the gear shift boot.
Its a Mr Gasket #1651 5 1/4" in diameter and fits perfect.