1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

How to D27 spindle removal

Discussion in 'Early CJ5 and CJ6 Tech' started by Rootpass, Apr 26, 2015.

Page 2 of 2
  1. Apr 27, 2015
    Rootpass

    Rootpass USMC Parachute Riggers "The last to let you down"

    McDonough, GA
    Joined:
    Mar 26, 2015
    Messages:
    70
    Mullen you mailbox is full. I can't reply to your message.
     
    Rootpass, Apr 27, 2015
    #21
  2. Apr 27, 2015
    Keys5a

    Keys5a Sponsor

    Florida Keys
    Joined:
    Jan 23, 2014
    Messages:
    4,215
    That second photo almost makes me cry. Those drag nuts are nearly impossible to find! Can you at least save the tab washer under that cracked nut?
    -Donny
     
    Keys5a, Apr 27, 2015
    #22
  3. Apr 27, 2015
    Rootpass

    Rootpass USMC Parachute Riggers "The last to let you down"

    McDonough, GA
    Joined:
    Mar 26, 2015
    Messages:
    70
    I have the tab washer. I can make another drag nut on my lathe. Do you want a set?
     
    Rootpass, Apr 27, 2015
    #23
  4. May 12, 2015
    Rootpass

    Rootpass USMC Parachute Riggers "The last to let you down"

    McDonough, GA
    Joined:
    Mar 26, 2015
    Messages:
    70
    Thought I'd post all of the pictures from rebuilding my Dana 27 knuckles and the bearing numbers if anyone happens to find this post. I have really enjoyed doing this rebuild. Very rewarding and what a difference in steering!
    All bearings and races are Timken made in the USA. Bought for 50% less than other places from Rockauto.com

    Wheel bearing. LM501349
    Wheel bearing race. LM501314
    Kingpin bearing. 11590
    Kingpin bearing race. 11520
    Rockauto also lists the grease seal but I don't have a part number.
    The spindle nut socket is 2 1/16".
     
    Last edited: May 12, 2015
    Rootpass, May 12, 2015
    #24
  5. May 12, 2015
    Rootpass

    Rootpass USMC Parachute Riggers "The last to let you down"

    McDonough, GA
    Joined:
    Mar 26, 2015
    Messages:
    70
    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
    Rootpass, May 12, 2015
    #25
  6. May 12, 2015
    Rootpass

    Rootpass USMC Parachute Riggers "The last to let you down"

    McDonough, GA
    Joined:
    Mar 26, 2015
    Messages:
    70
    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
    Rootpass, May 12, 2015
    #26
  7. May 12, 2015
    Rootpass

    Rootpass USMC Parachute Riggers "The last to let you down"

    McDonough, GA
    Joined:
    Mar 26, 2015
    Messages:
    70
    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
    Rootpass, May 12, 2015
    #27
  8. May 12, 2015
    Rootpass

    Rootpass USMC Parachute Riggers "The last to let you down"

    McDonough, GA
    Joined:
    Mar 26, 2015
    Messages:
    70
    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
    Rootpass, May 12, 2015
    #28
  9. May 12, 2015
    Rootpass

    Rootpass USMC Parachute Riggers "The last to let you down"

    McDonough, GA
    Joined:
    Mar 26, 2015
    Messages:
    70
    [​IMG]

    Also, after my daughter put a Mother's Day cake in the oven, she came out and packed wheel bearings.

    [​IMG]
     
    Rootpass, May 12, 2015
    #29
Page 2 of 2
New Posts