1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

My 67 CJ5 build

Discussion in 'Builds and Fabricators Forum' started by Johns1967CJ5, Dec 11, 2013.

  1. Aug 4, 2022
    Johns1967CJ5

    Johns1967CJ5 Sponsor

    Northern NJ
    Joined:
    Dec 5, 2013
    Messages:
    1,698
    Sawz
    Sawzall
     
  2. Oct 8, 2022
    Johns1967CJ5

    Johns1967CJ5 Sponsor

    Northern NJ
    Joined:
    Dec 5, 2013
    Messages:
    1,698
    Beautiful fall day for a car show

    [​IMG]
     
  3. Aug 15, 2023
    Johns1967CJ5

    Johns1967CJ5 Sponsor

    Northern NJ
    Joined:
    Dec 5, 2013
    Messages:
    1,698
    Took Ole Blue out for a nice ride. Man that hanging gas pedal just keeps me uncomfortable. I have to keep my foot up on the transmission cover. What a pain

    [​IMG]

    I tried a very simple fix, I got a floor mounted pedal for a m38a1 off of ebay. I just took off my existing pedal, leaving the original linkage and screwed the pedal to the floor. It just rides on the original linkage rod pushing it down. Works like a charm, I can keep my foot flat on the floor now. I really wanted to keep everything factory correct but whats the point if it's not fun ?

    [​IMG]
     
    melvinm, ojgrsoi, Fireball and 2 others like this.
  4. Aug 15, 2023
    maurywhurt

    maurywhurt Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Western North...
    Joined:
    Dec 12, 2009
    Messages:
    897
    I had the same problem with my original V6 hanging gas pedal, but solved it by adapting a pedal for a Ford (Bronco, truck, or full-size car) to work with the original Jeep bracket. The pedal is much closer to the floor, and far more comfortable to drive now. Here's a post I wrote up on it a few years back:

    http://www.earlycj5.com/xf_cj5/index.php?threads/123865/
     
    jeepstar and Fireball like this.
  5. Aug 15, 2023
    Johns1967CJ5

    Johns1967CJ5 Sponsor

    Northern NJ
    Joined:
    Dec 5, 2013
    Messages:
    1,698
    I actually read this thread last week and bought a bronco pedal to try, It worked but it was still uncomfortable to me as I still had to keep my foot off the floor a bit and it was very touchy. Maybe I did it wrong. Also broke my original bracket getting the pin back in :(
    The floor mounted one is sooo much better for me. Like driving a modern car.. kinda
     
    maurywhurt likes this.
  6. Aug 16, 2023
    maurywhurt

    maurywhurt Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Western North...
    Joined:
    Dec 12, 2009
    Messages:
    897

    The conversion I did works really well for me, but the level of comfort probably has a lot to do with individual leg length, shoe size, etc.

    Along the same lines that you went - really just for the cool factor - I've actually thought about re-converting to one of these reproduction pedals, which only recently became available. This would however require installing studs in the floorboard, and possibly modifying or replacing the accelerator rod:

    https://stores.partsdude4x4.net/gas-pedal/
     
    Last edited: Aug 16, 2023
  7. Aug 16, 2023
    Jw60

    Jw60 Safety Control Rod Axe Man 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Trails end,...
    Joined:
    Apr 8, 2008
    Messages:
    5,514
    That's how mine is being a 4cyl tub with a v6 swap.
     
  8. Aug 16, 2023
    givemethewillys

    givemethewillys Been here since sparky ran it. 2022 Sponsor

    New Kent, VA
    Joined:
    Jun 21, 2005
    Messages:
    2,062
    Jw60, John's conversion didn't click with me until your comment. Thank you sir, I appreciate it. I have both the v6 linkage and the 4cyl one, even though my original jeep was a 4 cyl. I like how the original '57 pedal looks.

    I've been scratching my head for a long time trying to figure out how I'd adapt the 4 cyl linkage to the dauntless, and now I have my answer!
     
    Last edited: Aug 16, 2023
    Jw60 likes this.
  9. Aug 16, 2023
    Jw60

    Jw60 Safety Control Rod Axe Man 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Trails end,...
    Joined:
    Apr 8, 2008
    Messages:
    5,514
    No problem, I have the v6 linkage drawing over in the resources if you need to make a new firewall bracket and arm.
     
    givemethewillys likes this.
  10. Aug 18, 2023
    jbrucru

    jbrucru Member 2023 Sponsor 2022 Sponsor

    Glasgow, KY
    Joined:
    Jun 15, 2011
    Messages:
    198
    That is one beautiful jeep I'm a big fan of the color!
     
  11. Aug 18, 2023
    givemethewillys

    givemethewillys Been here since sparky ran it. 2022 Sponsor

    New Kent, VA
    Joined:
    Jun 21, 2005
    Messages:
    2,062
    Hey John, one question about your pedal setup. Do you have any of the m38a1 linkage attached at the back of the pedal, or did you just cut it off? Mine has a riveted on ball (looks like you have similar in the top/left of the pedal) with the linkage protruding towards the firewall. This is the original '57 configuration.

    I don't necessarily want to cut it off, but don't see an easy way to remove it without destroying it.
     
  12. Aug 18, 2023
    Johns1967CJ5

    Johns1967CJ5 Sponsor

    Northern NJ
    Joined:
    Dec 5, 2013
    Messages:
    1,698
    I took a Dremel and cut the welds on the ball socket and removed it. It will leave a hole in the pedal, I just used JB weld to fill it for now. Eventually when I get ambitious I'll fill with a weld.
    The original hanging pedal linkage stays. The new pedal just rides on the rod, it's not attached to it.
    That rod will pop out of the socket with some persuasion
     
    givemethewillys likes this.
  13. May 20, 2024
    Johns1967CJ5

    Johns1967CJ5 Sponsor

    Northern NJ
    Joined:
    Dec 5, 2013
    Messages:
    1,698
    Ahhh, ☀️ summer

    [​IMG]
     
    ojgrsoi, vtxtasy, timsresort and 8 others like this.
  14. May 20, 2024
    Rozcoking23

    Rozcoking23 RUN & GET BIT! 2024 Sponsor

    Stockton, CA
    Joined:
    Mar 29, 2008
    Messages:
    1,075
    Take your top off and let the sunshine in!
    Beautiful JEEP!
     
    vtxtasy, Johns1967CJ5 and maurywhurt like this.
  15. May 20, 2024
    mikvar

    mikvar Member 2024 Sponsor

    Frankenmuth, MI
    Joined:
    Dec 21, 2023
    Messages:
    120
    That is a beauty!
     
New Posts