now with the college years coming to a close, i had a ton of other things on my mind and the CJ5 wasnt at the forfront of them...... I traded the...
well this thread hasnt been posted to in 3 years or so. The CJ-5 has been in and out of my possesion. As the last post stated, pictures were...
Seconded. I spoke to a local wheeler (who has a TPI-350 in his CJ-7) and he informed me that what HE would do, considering my current setup, was...
to be honest the more I look into the Megasquirt system the more a seem to like it. My offy intake can accept a nice TBI Unit off the right year...
I should probably clarify my intentions here. my cj5 has an EVEN fire pattern, and already has HEI ignition and such. my cj2a has the oddfire...
I ran 34x9.5x15 TSL's on my stock height CJ-5 and only slightly rubbed behind seat, and inner wheel wells. with spacers I only hit springs lock to...
First off.......Hello guys, been a while since I've posted on here. Simply....my 1966 CJ-5 has a 1979-81 Buick 231 with a 2-Barrel "Dualjet"...
no, just a capped fuel pump. but it has a clear glass filter just before it, and its full with fuel.
sister thread: http://www.jeepforum.com/forum/f8/48-willys-weirdest-engine-problem-ive-ever-known-1159175/
So, i have a 48 willys pickup, go devil, problem. truck idles and starts great! i mean perfectly. truck also runs even better when i start...
Well some what of an update here. I just went and picked up the CJ5 this afternoon from MAACO.....the new paint job and bodywork came out great...
oh i get it now, makes sense that its starving considering I drove the rod all the way down when i disassembled and rebuilt the carb.
i do not understand the point of the metering rod gauge, is it to make sure the rod sits in the hole and not off to the side? or is it the set the...
What i found this morning after some tinkering: Well, I got it idling amazingly. When the throttle is pushed, there is a great stream of fuel into...
i just gave the vacuum system a once-over and no leaks. I did make the float level 3/8" and per kit instructions made the idle screw 1 1/2 turns...
Ironically if I put her at full choke there is NO bogging or anything, but the idle mixture screw is out 1 1/2 turns as per kit instructions
Hello, My Willys Pickup just hit 10K the other day when she suddently started getting harder and harder to start. I was quite confused about...
http://www.youtube.com/watch?v=S3DllTFrBTk&NR=1
Inspiraton: http://www.youtube.com/watch?v=K032yBUePoQ&NR=1
Tonight came with a bit of a surprise, in the form of a Universal 21 Circuit wiring harness, and a Summit Racing Moab heater. eBay: Gotta love...
Separate names with a comma.