The Jeep M715 had an off set xfer case and a centered rear diff no vibrations from the factory. But the drive shaft was a tad bit longer. Kevin
Thanks for the information, The Jeep looks good in the pictures but as you get closer you notice the top was new in 1995 and the paint is cracking...
I went and looked at a 1967 CJ-6 I was interested in buying off of Craigslist. The rear springs were out-boarded was this stock? I did not think...
Mine is in my wallet for both my jeeps
is there a off the shelf HEI that fits the 225? IF so whats the part number if known? Thanks, Kevin Thread separated for better coverage...
A little more history on the motor. a couple years ago in the mornings you could hear it knock until oil pressure built up to 5-10psi. after it...
So my v6 has a knock on start up again(I replaced the main bearings a couple years for the same issue) I got a quote from the local auto repair...
Just a thought but a Jeep M715 has a NP200 which is an off-set x-fer case and a centered D70 from the factory. So the drive line is angled from...
I have been running Good Year MTR's in various sizes since the first design in 31 and 33's and the second design in 33's and 35's. They wear a...
For some reason I though that the 700R4 and 4e60 were the same besides some upgrades and year made and was based off the Turbo 350 which was in...
Get a professionally built full roll cage it should not be that expensive and the peace of mind is well worth it.
It sure looks close to the pumpkin I'm sure you have verified clearance when the suspension compressed. Also how hard do you wheel the jeep?...
These might be of interest to you. http://www.holbrookspecialties.com/ When I get the money I will be going with them for my 53 as everyone...
Fisherman, As you know the M715 came with the centered rear diff and off-set xfer and it has no double joints from the factory and no vibration....
I have had a Detroit in my newer CJ since the 80's first with a manual transmission and yes it makes some noises when shifting in corners and in...
I took mine to a rebuild shop and told me 49.95 to rebuild. Came back the next day and they gave me a new one as the old one was not rebuildable....
Great link thanks I guess I need to search more before posting Kevin
Thanks for the information I will pull the starter since it needs to come out anyways and see what I have.
I have a 53 Cj3a with the dauntless v6 in it and the starter is having problems. So does anyone know if all the starters are the same? so I can...
Why do you need to upgrade? are you breaking parts or are you going to be doing some hardcore rock crawling? this will help determine if you need...
Separate names with a comma.