I have propane on my f-head, I work on fork lifts so parts come easy. the problem that I had was that there is no lead in propane, so burning the...
Do you have a skip? my engine ran like crap, turned out to be a leaking exaust valve.
I put one on my 55 cj5, I backed off the idle screw turned the air mixture screw in until it would run rough, then back it off 1/2 turn the carb...
I have the same master cyl, I put a reservoir mounted to the fire wall with a hose to the top of the cap on the master cyl,works good. just a idea...
Has anyone tried to install a new style dist.w/ vacuume advance on a f-head? I was thinking of installing a new style dist. on my 1955 f-head,any...
Thanks
I have installed one in my 55 f-head it worked great until I smoked it trying out a electronic ign. coil, stick with a standard coil with a resistor.
anyone installed a altenator as a welder on a f-head?
Mine does the same thing I think my oil is a little to heavy 20w50,help keep the rattle down,lol
I just rebuilt my t90,I installed the truck gear set,with the short input shaft, I love the lower first and second gear. I left the oil slinger...
I have power steering that will help, I want to go to tellico this spring,but need to be locked up in the front. No money for lockers,married with...
I am thinking of welding up my dana 25,it is mostly a off road jeep
Mine started smoking, tore it down and found three pistons with broken rings,top ring. The oil rings had a lot of wear,there was a lot of blow by.
I welded my dana 44,no problems,I just make wider turns to keep some stress off
Separate names with a comma.